Skip to main content Skip to search Skip to main navigation
Go to homepage

Blue Epoxy Systems For In-House and Lateral Systems

Product information "Blue Epoxy Systems For In-House and Lateral Systems"

Sanikom epoxy resin bundle for in-house and mainline rehabilitationhardens very quickly. Epoxy resin system for the house and house connection area, consisting of epoxy resin and hardener. In combination with pipe liners or a felt hat it creates a robust material for sewer pipes. Blue colored product for easier control during processing and for visibility in the pipe. Very pleasant to process due to its slightly thicker consistency. Due to its special flow properties, it also adheres excellently to the fabric. Very fast curing times compared to other products in the same price category! Price per bundle.

 

There are 5 different epoxy systems to choose from (for properties, see Technical Data):

 

EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2  (Bundle 14 kg + 3,92 kg)

- medium viscosity

- cure very quickly at room temperature

- suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius

- high mechanical and Résistance chimique as well as temperature resistance even when cured in the room

- hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.

 

EX1-2 and EX2-2  (Bundle each 14 kg + 3,5 kg)

- Medium viscosity

- Fast curing

- Suitable for short to medium installation lengths

- High mechanical and Résistance chimique as well as temperature resistance even with room curing

- Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.

 

EX4-2  (Bundle 14 kg + 2,8 kg)

- Excellent reactive system with low viscosity and a good ratio between processing and curing time

- suitable for short to medium installation lengths

- high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.

 

WARNING

Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.

Blue Epoxy Systems For In-House and Lateral Systems Technical details

Skip product gallery

We recommend matching this product:

Inflatable Rubber Plugs for T-Packers

Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.

From £413.82*
Details

Inversion Fitting 6" With Storz Coupling 50 - 250 mm

Inversion Fitting 6" With Storz Coupling 50 - 250 mm

From £378.18*
Details

ASCOPA Rehabilitation Hose DN 800 - DN 3000

Ascopa rehabilitation hose for large and small diameters. Effective renovation for leaking pipe joints in the socket area. Sealing of socket gaps in accessible sewers and tapered socket gaps from 20 mm to 50 mm socket gap width, with an installation depth of at least 50 mm. The mode of action of the ASCOPA rehabilitation hose is that of an inflatable seal, it can be checked at any time and re-injected if necessary. Available nominal diameters: DN 800 - DN 3000.  Features of ASCOPA rehabilitation hoses The hose can also be installed with a conical socket gap Design of the seal compensates for unevenness Removal and installation uncomplicated and possible at any time The fluid used for filling is environmentally friendly, permanently elastic and cost-effective The renovation hose is available in various profile cross-sections (e.g. egg-shaped profile, mouth-shaped profile or box-shaped profile) EPDM approval according to DIN-EN 681-1 Valve: 1.4404   Good to know: You don't have to worry about the Ascopa rehabilitation hose being damaged during sewer cleaning work, as the EPDM material is sufficiently strong and has a shear strength of 60.

From £199.98*
Details

Sanikom Silicon Bladers Inhouse Repair System

Sanikom Silicon Bladers / T-Blader Inhouse Repair System, used for installing T Felt Liners. Silicone bladders requiring low installation pressure of 0.6 - 0.8 bar only. Several sizes available (DN 70 - 200).  Packer sleeve made of fabric-supported silicone with slight elasticity. The T-Packer is used without release agent as no resin adheres. Suitable for both cold and steam curing.  Side connection: DN 40 to DN 150 (90° or 45°). Maximum pressure: 1.0 bar

From £262.35*
Details

Impregnation Table Extension DN 300 Length 1-2m

Impregnation Table Extension DN 300 Length 1-2m.   Additional roller conveyor for Sanikom impregnation tables, suitable as extension for models 225, 300 and 400. Working height 800 mm, height easily adjustable.  Easy-to-transport impregnation table extension with low weight and stable construction.

From £1,437.48*
Details

Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.  Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.  Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.    

From £166.32*
Details