Cable Extension for Measuring System BPS03 by Aquametrics - Probe Cable Extension 25m

BPS 03 Complete Set for Leak Testing with Water Leak detection device by Aquametrics as a level measurement device for leak testing. Fast and easy operation of the measurement system for leak tests with water in pipelines and shafts, conducted as a water level probe.Note: The software for Aquametrics products is currently only available in German. If this is a concern, our technical customer support team is happy to assist you.  Water-Level Probe Execution of leak testing for pipelines and shafts according to the following standards: DIN 1986-30:2012-02 DIN EN 1610 DWA A-139 The high accuracy of the probe has been confirmed by LGA in Würzburg. The AquaDP software (only in German) functions as a standalone version and includes the module "Wasser" as a part of the software. Advantages High measurement accuracy even at low immersion depth Level probe as a capacitive transmitter High-quality ceramic measurement cell with pressure and temperature compensation Probe can be directly used in wastewater Probe extendable via chain (instead of pipe guidance) Probe head can be used without tripod Probe usable up to 10 m immersion depth (overload up to 300 mbar) Up to 4 probes can be used simultaneously (optional) Explosion-proof probe available as an option Coarse filter included in the kit Robust probe height adjustment for construction site use Easy connection to PC or tablet via USB Powered via USB with minimal power consumption Our tests are performed according to standards such as DIN EN 1610, DWA-A 139, DIN 1986-30, DWA-M 149-6, DIN 1999-100, DIN 4040-100, DIN EN 805, and DVGW-W400. Scope of Delivery Aluminum tripod with triple height adjustment With plastic screw connection M50 for probe adjustment Test probe in ABS plastic transport case PVC pipe DN40 for holding the test probe 2 x 1.2 m with connection coupling DN40 Pipe end caps DN40 for probe extension with chain, etc. Coarse material filter attachable as probe protection for wastewater with fiber materials, etc. Robust splash-proof converter with probe connection socket and USB output Test software AquaDP (in German) as a standalone version with the software modules "Wasser" as part of the software. For installation on Windows operating systems from WIN 7. For tablet, laptop, and office PC applications. (Windows 32-/64-bit) Free online updates, always the latest standards and software versions available. Maintenance and Service Depending on the operating conditions, checking the measurement system is absolutely necessary. The recalibration interval depends on the specific application conditions (e.g., separator inspection). Recommended recalibration interval: 1 year. Deposits on the ceramic membrane can lead to signal changes. In such cases, the ceramic membrane can be carefully cleaned of deposits using a commercially available descaler and a brush or soft bristle brush. Afterwards, rinse with cold water.

Aquametrics Leak Testing System (BPS03 GI)/ Separator Inspection as Part of General Inspection Fields of Application Water level testing (e.g., fill level test or water level measurement) as well as leak testing of pipelines, manholes, and separator systems such as oil or gasoline separators. Leak tests on grease separators can also be performed quickly and easily. Note: The software for Aquametrics products is currently only available in German. If this is a concern, our technical customer support team is happy to assist you.Applicable Standards DIN 1986-30:2012-02 DIN EN 1610 DWA A-139 The high measurement accuracy of our level probe has been tested and certified by TÜV Rheinland / LGA in Würzburg. A corresponding test certificate is included. Software The AquaDP software is offered as a single-user solution (currently only in German). It includes modules for separator inspection and water level measurement (Wasser + GI). Suitable for Separator Systems According to: DIN 1999-100 DIN 4040 Your Advantages Highly accurate measurement results – even at low immersion depths Level probe with capacitive measurement principle Durable ceramic measuring cell with pressure and temperature compensation Direct use in wastewater possible Probe extension via chain (instead of pipe guide) Probe head can also be used separately without a stand Usable up to 10 m immersion depth without damage (overload protection up to 300 mbar) Supports connection of up to 4 probes simultaneously (optional) Optional EX-protected version available Coarse particle filter included as attachment in the case set Very robust height adjustment with plastic screw fitting – ideal for use on construction sites Simple USB connection to PC or tablet USB power supply directly from the device Low power consumption – long operating time Testing According to the Following Standards: DIN EN 1610 DWA-A 139 DIN 1986-30 DWA-M 149-6 (formerly ATV-M 143-6) DIN 1999-100 DIN 4040-100 DIN EN 805 DVGW-W400 Maintenance and Service Depending on the operating conditions, checking the measurement system is absolutely necessary. The recalibration interval depends on the specific application conditions (e.g., separator inspection). Recommended recalibration interval: 1 year. Deposits on the ceramic membrane can lead to signal changes. In such cases, the ceramic membrane can be carefully cleaned of deposits using a commercially available descaler and a brush or soft bristle brush. Afterwards, rinse with cold water.