Carbolith PL Silicate Resin, Component A, Water Glass, 23.8 kg
Component A supplies the water glass for the CarbolithPL resin 3K system
23,8 kg bucket, corresponds to approx. 18 liters
Produced in EU. General building authority approval: DIBt no. Z-42.3-383
Quality resin for high and low processing temperatures. Curing can be individually controlled with this 3K system.
Non-foaming, elasticized three-component resin with good adhesion even on damp surfaces. Suitable for bonding partial inliners (short liners) during sewer rehabilitation.
Safety and hazard information
- contains no diisocyanates
- CLP Classification: GHS07
- UN number: not regulated
- Please observe the >> safety data sheet to protect yourself and others!
Circum Mini Internal Rehabilitation Sleeve With DIBt Approval DN 150 - DN 800
The Circum MINI Internal rehabilitation sleeve with DIBt approval (German Institute for Structural Engineering) is an internal pipe sleeve for small to medium diameters. It is positioned over the damaged spot using an inflatable packer and then pressed against the pipe walls. Expanding the stainless steel sleeve presses the EPDM seal against the inner pipe walls and permanently seals the damaged spot. The Circum MINI rehabilitation sleeve with its patented, external lock ensures minimal cross-sectional reduction in the pipes and prevents passing impediments from becoming lodged. The rehabilitation sleeve is designed for internal pipe pressures of up to 16 Bar (225psi). Nominal diameter DN 150 - DN 800, width 400 to 450 mm. Free from environmentally harmful lubricants. Fully fitted and ready to mount. Applications: Longitudinal cracks, radial cracks, leaky pipe connections, missing wall sections, closing of unused laterals, replacing missing formwork behind inliners, part formation.
GRP Laminate 1081 g/m² Roll Length: 40 m, Width: 34 - 130 cm
GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1081 g/m² in various roll widths and nominal widths - see technical details. The price applies to a roll of approx. 40 m GRP laminate 1,081 g/m². Various widths are available. A product overview can be found under "Technical Details".
Lateral Packers Up To 5 m Length, 70 - 250 mm
Lateral packers are used to repair laterals (home pipelines). Our lateral packers are manufactured from SBR+NR mixed rubber and strong fabrics. They are able to run between -30°C and + 70°C. They are tested at the 1,3 times higher than their pressure and have a very high bursting pressure.
ECR GRP laminate 1387 g/m², width 34 - 130 cm DN 100 - 250, price per 40 m roll
GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1387 g/m² in various roll widths and nominal widths - see technical details. Price for a roll with approx. 40 m of laminate. The total weight can be found on the technical data sheet. The weight of the rolls may vary slightly (+/- 0.5 kg) due to the manufacturer.
Grenade Sewer Nozzle, 1/2" - 5/4" for Cleaning and Flushing of Sewer Systems
The Grenade (Granate) is a highly effective sewer nozzle for cleaning and flushing sewer systems. It is used as a mixed nozzle to clean pipes and flush out waste with its concentrated jet action. By arranging the jets at different jet angles, the grenade achieves high cleaning power for routine cleaning work in sewers. The different versions are distinguished by their areas of application: Grenade 50 (1/2") Small, lightweight sewer nozzle for the 100 - 200 mm application range, for cleaning pipes and flushing out waste. Grenade 60 (3/4" or 1") Sewer nozzle for the application range 200 - 300 mm, with 2 different jet angles 10° and 30°, for regular cleaning of sewers and flushing out of waste. Grenade 70 (3/4" or 1") sewer nozzle for the application range 200 - 400 mm, with 3 different jet angles 5°, 15° and 35°. This nozzle has ceramic nozzles with a jet concentrator and a water conduction system. It is ideal for removing sand and stones from the lower part of the pipelines. Grenade 80 (3/4" or 1") sewer nozzle for application range 250 - 500 mm, with 2 different jet angles 10° and 30°, for cleaning and drainage works in sewers for large pipelines. Grenade 100 (3/4" or 1") sewer nozzle for the application range 300 - 600 mm, with 2 different jet angles 7° and 15°, very effective dirt dragging nozzle for dragging sand and stones in the sewer. Grenade 120 (1" or 5/4") sewer nozzle for application range 300 - 800 mm, with 3 different jet angles 7°, 14° and 21°, a nozzle with large internal lung, high power and hydraulic flow, ideal to overcome and clean large distances.
Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400
The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes. Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm. Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.
Air Push Rod blue with safety clutch for sewer rehabilitation
Air push rod 7.2 with safety coupling, available in lengths from 1.0 to 3.0 meters – Color: Blue The air push rod 7.2 is a reliable and robust professional accessory for short liner rehabilitation. It impresses with its ease of use, high stability, and versatile applications in daily construction site use. The integrated safety coupling ensures a particularly convenient and secure connection: simply insert, screw in, and it's ready for immediate use. Thanks to the additional safety lock, the connection remains stable even under load and will not detach unintentionally – even in demanding applications. The air push bar is available in 5 lengths from 1.0 to 3.0 meters. The blue version offers medium stiffness and is ideal for use in straight pipe sections. The push rod is compatible with individual coupling systems. Custom adapters or connection solutions can be easily integrated, allowing for maximum flexibility in use. Applications: Suitable for use with rehabilitation packers, sealing bladders, and pipe sealing cushions. Advantages at a glance: Secure plug-in coupling with additional safety lock Quick and easy handling Stable connection even under higher loads Individually expandable with custom coupling systems Robust design for professional use
Push Bar blue with Hexagonal Coupling for sewer rehabilitation
Air push rod, blue, with hexagonal coupling for precise positioning of rehabilitation packers, available in lengths from 1.5 to 3.0 m. indispensable tool for pipe renovation on T-pieces particularly suitable for use with a T-packer for the rehabilitation of sockets and branches Due to the firmly seated hexagonal coupling, the packer can be turned with the help of the air push rod and thus achieves the perfect fit in the side connection of the sewage pipe We would be happy to advise you on the search for suitable accessories for your sewage project.