Epoxy Systems For Mainline Liner Low Viscosity

Sanikom epoxy resin bundle for in-house and mainline rehabilitation, hardens very quickly. Epoxy resin system for the house and house connection area, consisting of epoxy resin and hardener. In combination with pipe liners or a felt hat it creates a robust material for sewer pipes. Blue colored product for easier control during processing and for visibility in the pipe. Very pleasant to process due to its slightly thicker consistency. Due to its special flow properties, it also adheres excellently to the fabric. Very fast curing times compared to other products in the same price category! Price per bundle.   There are 5 different epoxy systems to choose from (for properties, see Technical Data):   EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2  (Bundle 14 kg + 3,92 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.   EX1-2 and EX2-2  (Bundle each 14 kg + 3,5 kg) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.   EX4-2  (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between processing and curing time - suitable for short to medium installation lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.   WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.

Calibration hose - temperature resistant up to 80°C (Water / Steam), DN 100 - 350 mm, transparent (suitable for UV curing). Calibration hoses are used for liner insertion into the pipe system.

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.  Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.  Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.