Felt Hats Stretchable With PU Coating 4,5 mm

Control Unit for Sanikom T packers (vacuum - pressure)

Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.

Epoxy resin system with low viscosity for the main pipe area, consisting of resin and hardener, for pipe liners. Produces a robust pipe material for section rehabilitation in combination with pipe liners. Very fast curing times compared to other products in the same price category! Price per bundle.   There are 6 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,9 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.   EX1-2 and EX2-2 (Bundle 14 kg + 3,5 kg each) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.   EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between working and curing time - suitable for short to medium paving lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.   EX9-15 HV (Bundle 13 kg + 4,55 kg) - high viscosity, low reaction system with very long processing time - only hardens at high temperatures, requires heat - suitable for long paving lengths ans special applications - can also be used as a pre-impregnation system - this system features high mechanical and Résistance chimique as well as high temperature resistance when cured at a temperature of 60-80 degrees Celsius.   WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.

Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection - Accessory for Sanikom T packers.

Sanikom T-Packer - Main packer for T-Connection Repair in combination with inflatable rubber plugs.   Operating pressure between 1.5 and 2.5 bar depending on the version. Available in 8 different application ranges from 100 - 700 mm diameter, see technical data.

Sanikom packer basic holder for silicone bladers, with aluminium elements, for T-House Connection Repair.   Available in 4 versions from DN 30 - 87 mm, for recommended silicone T-blader sizes from DN 70 - 200 mm.