Inflatable Rubber Plugs for T-Packers

Sanikom Silicon Bladers / T-Blader Inhouse Repair System, used for installing T Felt Liners. Silicone bladders requiring low installation pressure of 0.6 - 0.8 bar only. Several sizes available (DN 70 - 200).  Packer sleeve made of fabric-supported silicone with slight elasticity. The T-Packer is used without release agent as no resin adheres. Suitable for both cold and steam curing.  Side connection: DN 40 to DN 150 (90° or 45°). Maximum pressure: 1.0 bar

Sanikom T-profile liner / T-Felt Liner 3.3 mm with PU coating for house connection repair. Available in different sizes, see Technical details. Dimensions of the T-profile liner: 50 cm / 25 cm (see illustration).  T- Felt Liner Impregnation- Mixing the resin and impregnating the T-liner- The resin must be mixed in the correct ratio- The resin must be mixed for 3 minutes- Pour the resin onto the liner and massage it deep into the structure of the T-Liner. Check the complete impregnation by looking into the T-liner- Impregnation (impregnation) without white spots Fill the packer with T-Liner- Push silicone packer side connector into packer and place packer under vacuum place- Pull T-Liner over packer (positioning over inverted side port)- Invert the packer side port out with light pressure- Reduce packer pressure to invert the side port including the T-liner into the packer (without folding).- Put the packer under vacuum- Fix the T-Liner with crepe tape Please note: The side connector should be pushed into the packer against the direction of installation.   We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415)- Sani EXR-2 (order number 1064416) 

Sanikom packer basic holder for silicone bladers, with aluminium elements, for T-House Connection Repair.   Available in 4 versions from DN 30 - 87 mm, for recommended silicone T-blader sizes from DN 70 - 200 mm.

Turn Handle - Accessory for Sanikom T packers.

Epoxy resin system with low viscosity for the main pipe area, consisting of resin and hardener, for pipe liners. Produces a robust pipe material for section rehabilitation in combination with pipe liners. Very fast curing times compared to other products in the same price category! Price per bundle.   There are 6 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,9 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.   EX1-2 and EX2-2 (Bundle 14 kg + 3,5 kg each) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.   EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between working and curing time - suitable for short to medium paving lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.   EX9-15 HV (Bundle 13 kg + 4,55 kg) - high viscosity, low reaction system with very long processing time - only hardens at high temperatures, requires heat - suitable for long paving lengths ans special applications - can also be used as a pre-impregnation system - this system features high mechanical and Résistance chimique as well as high temperature resistance when cured at a temperature of 60-80 degrees Celsius.   WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.