Epoxy Resin for Liners
Here you find the right resin for trenchless rehabilitation of buried pipes to match our liners. The range is divided into two groups, both of which are epoxy resins with DIBt approval. Our blue-colored rehabilitation resin was specially developed for use with our pipe liners, T-liners, and hat profiles in house connection areas or inside buildings.
Due to its high viscosity, the resin is also ideal for downpipes. We recommend our mainline resins for the inliner rehabilitation of large-diameter sewer pipes. The generally low viscosity facilitates processing for short to medium installation lengths. A high-viscosity mixture is also available, which is used for very long installation lengths or particularly challenging projects.
Epoxy resins pose health risks. Please wear personal protective equipment and strictly follow the instructions in the respective safety data sheet and the hazard labeling on the packaging.
Epoxy Systems For Mainline Liner Low Viscosity
Epoxy resin system with low viscosity for the main pipe area, consisting of resin and hardener, for pipe liners. Produces a robust pipe material for section rehabilitation in combination with pipe liners. Very fast curing times compared to other products in the same price category! Price per bundle. There are 6 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,9 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection. EX1-2 and EX2-2 (Bundle 14 kg + 3,5 kg each) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection. EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between working and curing time - suitable for short to medium paving lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius. EX9-15 HV (Bundle 13 kg + 4,55 kg) - high viscosity, low reaction system with very long processing time - only hardens at high temperatures, requires heat - suitable for long paving lengths ans special applications - can also be used as a pre-impregnation system - this system features high mechanical and Résistance chimique as well as high temperature resistance when cured at a temperature of 60-80 degrees Celsius. WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.
Content: 18.2 Kilogramm (£15.66 / 1 Kilogramm)
Blue Epoxy Systems For In-House and Lateral Systems
Sanikom epoxy resin bundle for in-house and mainline rehabilitation, hardens very quickly. Epoxy resin system for the house and house connection area, consisting of epoxy resin and hardener. In combination with pipe liners or a felt hat it creates a robust material for sewer pipes. Blue colored product for easier control during processing and for visibility in the pipe. Very pleasant to process due to its slightly thicker consistency. Due to its special flow properties, it also adheres excellently to the fabric. Very fast curing times compared to other products in the same price category! Price per bundle. There are 5 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,92 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection. EX1-2 and EX2-2 (Bundle each 14 kg + 3,5 kg) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection. EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between processing and curing time - suitable for short to medium installation lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius. WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.
Content: 18.2 Kilogramm (£16.20 / 1 Kilogramm)