Skip to main content Skip to search Skip to main navigation
Go to homepage

Lateral Packers Up To 5 m Length, 70 - 250 mm

Product information "Lateral Packers Up To 5 m Length, 70 - 250 mm"

Lateral packers are used to repair laterals (home pipelines). Our lateral packers are manufactured from SBR+NR mixed rubber and strong fabrics. They are able to run between -30°C and + 70°C.

 

They are tested at the 1,3 times higher than their pressure and have a very high bursting pressure. 

Lateral Packers

Skip product gallery

We recommend matching this product:

Push Bar blue with safety clutch for sewer rehabilitation

Air push rod with safety clutch, available in lengths from 1.0 to 3.0 meters. Colour: blue Professional accessory product for pipe repair / short liner rehabilitation Safe and simple plug-in coupling: snap in, screw, done! Thanks to the safety lock, the connection does not come loose even under load. suitable for use with individual coupling systems: you can easily attach your own coupling systems to these air push rods

From £43.56*
Details

ASCOPA Rehabilitation Hose DN 800 - DN 3000

Ascopa rehabilitation hose for large and small diameters. Effective renovation for leaking pipe joints in the socket area. Sealing of socket gaps in accessible sewers and tapered socket gaps from 20 mm to 50 mm socket gap width, with an installation depth of at least 50 mm. The mode of action of the ASCOPA rehabilitation hose is that of an inflatable seal, it can be checked at any time and re-injected if necessary. Available nominal diameters: DN 800 - DN 3000.  Features of ASCOPA rehabilitation hoses The hose can also be installed with a conical socket gap Design of the seal compensates for unevenness Removal and installation uncomplicated and possible at any time The fluid used for filling is environmentally friendly, permanently elastic and cost-effective The renovation hose is available in various profile cross-sections (e.g. egg-shaped profile, mouth-shaped profile or box-shaped profile) EPDM approval according to DIN-EN 681-1 Valve: 1.4404   Good to know: You don't have to worry about the Ascopa rehabilitation hose being damaged during sewer cleaning work, as the EPDM material is sufficiently strong and has a shear strength of 60.

From £199.98*
Details

Long Packer Good And Cheap, Diameter 200 - 800 mm, Lengths up to 5000 mm

Robust long packer for spot repairs on main lines from DN 200 to DN 800. Our long packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. The inflatable packers are resistant to temperatures between -30°C and +70°C, at a working pressure of 1.0 - 2.0 bar (see technical data). Available in diameters of 200 - 800 mm and lengths of 1000 - 5000 mm. With this long packer you get our own brand at a top price-performance ratio! The packer can also be equipped with a holder for fiberglass rods to support pushing for an additional charge.

From £395.01*
Details

GRP Laminate 1081 g/m² Roll Length: 40 m, Width: 34 - 130 cm

GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1081 g/m² in various roll widths and nominal widths - see technical details.  The price applies to a roll of approx. 40 m GRP laminate 1,081 g/m².  Various widths are available. A product overview can be found under "Technical Details".

From £131.63*
Details

Carbolith PL Silicate Resin, Component A, Water Glass, 23.8 kg

Component A supplies the water glass for the CarbolithPL resin 3K system 23,8 kg bucket, corresponds to approx. 18 liters Produced in EU. General building authority approval: DIBt no. Z-42.3-383 Quality resin for high and low processing temperatures. Curing can be individually controlled with this 3K system. Non-foaming, elasticized three-component resin with good adhesion even on damp surfaces. Suitable for bonding partial inliners (short liners) during sewer rehabilitation.   Safety and hazard information contains no diisocyanates CLP Classification: GHS07 UN number: not regulated Please observe the >> safety data sheet to protect yourself and others!

£206.92*
Details

Carbolith PL Silicate Resin, set includes all three components A, B, C

Get your 3C silicate resin in a practical set - Carbolith PL is a proven system for professional short liner renovation, consisting of the components resin (A), hardener (B) and catalyst (C) in the following quantities: 1 x CarbolithPL  component A, 23.8 kg (item no. 211-100-030) = resin / water glass 2 x CarbolithPL  component B, 18 kg (item no. 211-100-010) = hardener 1 x CarbolithPL  component C, 1 kg (item no. 211-100-040) = catalyst   Our set saves you from having to convert the chemical mixing ratios. The necessary and suitable constellation of this carbolith resin is already ideally put together in this set and is therefore ready for immediate use for pipe renovation. Suitable for bonding partial inliners (short liners) during sewer rehabilitation.   General building authority approval: DIBt no. Z-42.3-383   Safety and hazard information for the resin included: contains diisocyanates (only component C) CLP classification: GHS05 (component C), GHS07 (component A, B, C), GHS08 (component B, C) UN number: not regulated (component A, B), 3267 (component C) In the "Downloads" tab you will find a separate safety data sheet for each component, which should be observed.

£532.94*
Details

Push Bar blue with Hexagonal Coupling for sewer rehabilitation

Air push rod, blue, with hexagonal coupling for precise positioning of rehabilitation packers, available in lengths from 1.5 to 3.0 m.  indispensable tool for pipe renovation on T-pieces particularly suitable for use with a T-packer for the rehabilitation of sockets and branches Due to the firmly seated hexagonal coupling, the packer can be turned with the help of the air push rod and thus achieves the perfect fit in the side connection of the sewage pipe  We would be happy to advise you on the search for suitable accessories for your sewage project.

From £54.85*
Details

ECR GRP laminate 1387 g/m², width 34 - 130 cm DN 100 - 250, price per 40 m roll

GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1387 g/m² in various roll widths and nominal widths - see technical details. Price for a roll with approx. 40 m of laminate. The total weight can be found on the technical data sheet. The weight of the rolls may vary slightly (+/- 0.5 kg) due to the manufacturer.

From £175.50*
Details

Flex-Adapter For Packers And Air-Push-Rods

Flex-Adapter For Packers And Air-Push-Rods - Accessories for Sanikom sectional pipe rehabilitation.

£38.57*
Details

Circum Mini Internal Rehabilitation Sleeve With DIBt Approval DN 150 - DN 800

The Circum MINI Internal rehabilitation sleeve with DIBt approval (German Institute for Structural Engineering) is an internal pipe sleeve for small to medium diameters. It is positioned over the damaged spot using an inflatable packer and then pressed against the pipe walls. Expanding the stainless steel sleeve presses the EPDM seal against the inner pipe walls and permanently seals the damaged spot.  The Circum MINI rehabilitation sleeve with its patented, external lock ensures minimal cross-sectional reduction in the pipes and prevents passing impediments from becoming lodged. The rehabilitation sleeve is designed for internal pipe pressures of up to 16 Bar (225psi). Nominal diameter DN 150 - DN 800, width 400 to 450 mm. Free from environmentally harmful lubricants. Fully fitted and ready to mount. Applications: Longitudinal cracks, radial cracks, leaky pipe connections, missing wall sections, closing of unused laterals, replacing missing formwork behind inliners, part formation.    

From £185.13*
Details

Short Packer With Large Bypass And Wheel Set, affordable, Diameter 150 - 600 mm

Short packers with large bypass allow spot repairs and shut-offs of pipes while the pipe is still in service. Our robust short packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. The inflatable packers are suitable for temperatures between -30°C and +70°C, at a working pressure of 1.5 - 2.0 bar (depending on the model, see technical data).   The short packer has a set of wheels, which makes it easy to move in the pipe. Available in various diameter ranges from 150 - 600 mm. Areas of application: Partial repairs of damaged pipes Repairs with synthetic resins in conjunction with glass fiber composites Repairs during operation With this short packer with bypass you get our own brand at a top price-performance ratio!  

From £945.00*
Details

Medusa Packer, Good And Inexpensive, Application Range 70 - 250 mm, Lengths 600 - 2000 mm

Medusa packers are products that allow spot repairs in areas that are very close to the pipe ends. The robust packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. They are suitable for temperatures between -30°C and +70°C. The added value of this type of packer is that, thanks to its soft rubber back part, it provides access to areas where repairing the pipe is very difficult due to limited space. The Medusa packer is very easy to handle in such situations, and it can also be pushed closer to the edge of the inlet in the main pipe than other packers. With this Medusa packer you get our own brand at a great price-performance ratio! Working pressure depending on the model 2.0 - 2.5 bar (see technical data).   This packer can also be equipped with a holder for fiberglass rods to support pushing for an additional charge.

From £258.93*
Details

Carbolith PL Silicate Resin, B component, Hardener 18 kg

B-Component / Hardener for Carbolith PL Silicate Resin System. One bucket with 18 kg   Safety and hazard information contains diisocyanates CLP Classification: GHS07, GHS08 UN number: not regulated Please observe the >> safety data sheet

£156.49*
Details

Carbolith PL Silicate Resin Catalyst, C-Component, 1 kg

Carbolith C-Component Resin Catalyst 1 Liter Package, 1 kg   Safety and hazard information: contains no diisocyanates CLP classification: GHS05, GHS07, GHS08 UN number: 3267 Please note the >> safety data sheet

£13.04*
Details