Manhole Test Plugs with Bypass 600 - 850 mm

Component A supplies the water glass for the CarbolithPL resin 3K system 23,8 kg bucket, corresponds to approx. 18 liters Produced in EU. General building authority approval: DIBt no. Z-42.3-383 Quality resin for high and low processing temperatures. Curing can be individually controlled with this 3K system. Non-foaming, elasticized three-component resin with good adhesion even on damp surfaces. Suitable for bonding partial inliners (short liners) during sewer rehabilitation.   Safety and hazard information contains no diisocyanates CLP Classification: GHS07 UN number: not regulated Please observe the >> safety data sheet to protect yourself and others!

The universal cleaning nozzle is an excellent sewer cleaning nozzle for everyday use. Hardened stainless steel construction with 3D fluid mechanics and two different rear spraying angles of 15°/25° make this nozzle ideal for general pipe cleaning and preventative maintenance work. A forward spraying jet is also included. This nozzle comes standard with one-piece ceramic inserts. Recycle water approved.   Important: Please fill out the field Pump data: [flow rate in l/min and pressure in bar] so that we can supply you with the correct nozzle model.

Rotating steel pulling nozzle Alien for clogged pipelines and for cutting small roots. Due to the frontal steel rotation at an angle of 20°, the Alien nozzle breaks up stubborn blockages in pipelines.   There is a choice of 4 versions with threaded connection 1/2" - 1", which differ mainly in the range of application and the jet angle, see technical data. The Turbo version has a 30% stronger front jet.

Cleaning nozzle Vampire for cleaning large pipes from 150 - 400 mm. Threads to choose from: 1/2", 3/4" and 1".  Scope of application: removes stubborn blockages and rooting, removes sand and stones from pipes. Features 6 reflectors at a 35° angle.  Also available as a front emitter. For characteristics see technical data.

Lateral packers are used to repair laterals (home pipelines). Our lateral packers are manufactured from SBR+NR mixed rubber and strong fabrics. They are able to run between -30°C and + 70°C.   They are tested at the 1,3 times higher than their pressure and have a very high bursting pressure. 

The Pipe Wolf nozzle is an extremely aggressive specialty tool perfect for total blockages that are made from organic material. A hardened, tapered head with sharp edges utilizes turbine technology and spins approximately 10,000 rpms, boring a hole and opening up most any blockage in round and oval shaped pipes. This 1/2" nozzle comes standard with one-piece ceramic inserts, can be used with recycled water and delivers in emergency situations. Tier 3.   Important: Please fill out the field Pump data: [flow rate in l/min and pressure in bar] so that we can supply you with the correct nozzle model.

The Grenade (Granate) is a highly effective sewer nozzle for cleaning and flushing sewer systems. It is used as a mixed nozzle to clean pipes and flush out waste with its concentrated jet action. By arranging the jets at different jet angles, the grenade achieves high cleaning power for routine cleaning work in sewers.  The different versions are distinguished by their areas of application:  Grenade 50 (1/2") Small, lightweight sewer nozzle for the 100 - 200 mm application range, for cleaning pipes and flushing out waste.  Grenade 60 (3/4" or 1") Sewer nozzle for the application range 200 - 300 mm, with 2 different jet angles 10° and 30°, for regular cleaning of sewers and flushing out of waste.  Grenade 70 (3/4" or 1") sewer nozzle for the application range 200 - 400 mm, with 3 different jet angles 5°, 15° and 35°. This nozzle has ceramic nozzles with a jet concentrator and a water conduction system. It is ideal for removing sand and stones from the lower part of the pipelines.  Grenade 80 (3/4" or 1") sewer nozzle for application range 250 - 500 mm, with 2 different jet angles 10° and 30°, for cleaning and drainage works in sewers for large pipelines.  Grenade 100 (3/4" or 1") sewer nozzle for the application range 300 - 600 mm, with 2 different jet angles 7° and 15°, very effective dirt dragging nozzle for dragging sand and stones in the sewer.  Grenade 120 (1" or 5/4") sewer nozzle for application range 300 - 800 mm, with 3 different jet angles 7°, 14° and 21°, a nozzle with large internal lung, high power and hydraulic flow, ideal to overcome and clean large distances.

Tiger pipe cleaning nozzle available with rear jet only or with additional front jet. Available in two connection sizes with 1/4" or 3/8" threads. Small, low cost nozzles with 4 or 6 ceramic rear jets for powerful cleaning.  Small nozzle with 4-6 ceramic jets to the rear for strong propulsion. Range of application: Due to its compactness, the Tiger nozzle is ideal for small pipes and pipe bends, as it also comes around corners and curves well.  The laminar water jet provides constant cleaning and unclogging work in pipes from 75 to 160 mm in diameter. For all features, see technical data.

Luchs Pipe cleaning nozzle 1/2" for large profiles - Pipe diameter 160 - 300 mm Thread: 1/2" Pipe diameter: 160 - 300 mm Rear nozzle: 3 x M8 Water flow: from 40 l/min. Dimensions (mm): 64 x 115 Weight: 0,6 kg