Pipe Cleaning Pig SÖ-UB Uncoated, Medium-Solid, With Rope Core and Towing Eye, DN 50 - 600 mm

Cleaning pig of the SW-UB type - sponge pig made of high-density polyurethane foam, reinforced by a waterproof base plate, also made of polyurethane. It can also be delivered with a coated head upon request (at an additional cost).  These sponge pigs are uncoated and have a waterproof base plate. They can be squeezed very tightly, almost like a sponge in the bathtub. They also soak up water like a sponge. They are particularly suitable for lighter dirt.  When ordering, you should allow for a size tolerance of +/- 2% of the pig size that these pigs may have as they are manufactured manually. This is a quality product Made in Germany!   Features The cleaning pig passes effortlessly through 1.5 D pipe bends. Possible diameter reduction max. 15% Density: 20-25 kg/m³ Hardness Shore A: 70 Fitting constriction: yes Please always buy the pig approx. 1-1.5% larger than your pipe inner diameter Suitable for all pipelines (steel, cast iron, plastic) For pigging with water and air Areas of application: for drying, emptying, disinfecting (use an oversized pig and fill the water column with disinfectant material), venting For softer deposits and light contamination (such as dust) Remove dust Fine cleaning Change of nominal diameter (dimension jumps are possible depending on the individual case) Chemical applications would have to be examined individually Type SW-UB cleaning pigs are available in various sizes from DN 50 - 1200 mm (correspond to the inner diameter of the pipeline) and lengths from 120 - 1700 mm. We will be happy to provide you with further sizes and lengths of these cleaning pigs upon request!

Pipe Cleaning pig of the W-UB type - uncoated, soft foam pig made of high-density polyurethane foam, reinforced by a waterproof base plate, also made of polyurethane. It can also be delivered with a coated head upon request (at an additional cost).  This pipe cleaning pig is uncoated and equipped with a waterproof base plate. It is particularly characterized by the fact that it is a test pig and you can use it to see whether the line is still continuous. It is a soft test pig that also undergoes dimensional changes. It is suitable for first pigging and can push through various types of dirt. You can also use it to determine what the dirt load looks like.  When ordering, you should allow for a size tolerance of +/- 2% of the pig size that these pigs may have as they are manufactured manually. This is a quality product Made in Germany!  Features The cleaning pig passes effortlessly through 1.5 D pipe bends. Possible diameter reduction max. 15% Density: 80-100 kg/m³ Hardness Shore A: 70 Fitting constriction: yes Please always buy the pig approx. 1% larger than your pipe inner diameter if you want to remove sewage from the pipe. Suitable for all pipelines (steel, cast iron, plastic) For pigging with water and air Areas of application: For drying, emptying, disinfecting and ventilating As a transmitting newt for locating Transmitter chamber on DN 150 with surcharge Type W-UB pipe cleaning pigs are available in various sizes from DN 50 - 350 mm (correspond to the inner diameter of the pipeline) and lengths from 110 - 700 mm. We will be happy to provide you with further sizes and lengths of these cleaning pigs upon request!

Pipe pig of the M-UB type - uncoated, medium firm pig made of high-density polyurethane foam, reinforced by a waterproof base plate, also made of polyurethane. It can also be delivered with a coated head upon request (at an additional cost).  This pipe cleaning pig is uncoated and equipped with a waterproof base plate. It provides more resistance in the pipe than the softer W-UB pipe pig and does not compress in the same way as the W-UB type pig when an object is placed in the pipe. It usually pushes the debris or dirt out of the pipe and does not push past obstacles in the pipe like the W-UB pipe cleaning pig. This allows you to determine even more precisely what is in the pipe. This pipe pig is also a test pig.  When ordering, you should allow for a size tolerance of +/- 2% of the pig size that these pigs may have as they are manufactured manually. This is a quality product Made in Germany!  Features The pipe pig passes effortlessly through 1.5 D pipe bends. Possible diameter reduction max. 15% Density: 150-170 kg/m³ Hardness Shore A: 70 Fitting constriction: yes Suitable for all pipelines (steel, cast iron, plastic) For pigging with water and air Areas of application: As a test pig As a cleaning pig for muddy deposits For drying, emptying, disinfecting and ventilating Remove dust Fine cleaning Change of nominal diameter Transmitter chamber on DN 150 with surcharge Type M-UB pipe pigs are available in various sizes from DN 50 - 1200 mm (correspond to the inner diameter of the pipeline) and lengths from 110 - 2100 mm. We will be happy to provide you with further sizes and lengths of these cleaning pigs upon request!