T-Felt-Liner With PU Coating 3,3 mm

Epoxy resin system with low viscosity for the main pipe area, consisting of resin and hardener, for pipe liners. Produces a robust pipe material for section rehabilitation in combination with pipe liners. Very fast curing times compared to other products in the same price category! Price per bundle.   There are 6 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,9 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection.   EX1-2 and EX2-2 (Bundle 14 kg + 3,5 kg each) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection.   EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between working and curing time - suitable for short to medium paving lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius.   EX9-15 HV (Bundle 13 kg + 4,55 kg) - high viscosity, low reaction system with very long processing time - only hardens at high temperatures, requires heat - suitable for long paving lengths ans special applications - can also be used as a pre-impregnation system - this system features high mechanical and Résistance chimique as well as high temperature resistance when cured at a temperature of 60-80 degrees Celsius.   WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.

Control Unit for Sanikom T packers (vacuum - pressure)

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.  Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.  Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.    

This pipe inspection camera system impresses with its waterproof, robust design. The camera, which is not susceptible to interference, offers top quality thanks to the latest camera heads and LED lighting. The complete system consisting of camera, push rods on the reel and monitor is perfectly suited to inspect pipes in the range from Ø50 mm to Ø150 mm with its extremely compact design. Thanks to the 12 LED lights with adjustable luminosity, you always have the ideal illumination for every pipe diameter.The operating elements on the pipe inspection camera and on the remote control are provided with self-explanatory symbols, which allows for quick familiarization.Thanks to the on-screen meter counter, you always know exactly how far you have already driven into the pipe, recorded images and videos are immediately saved on the SD card and can be transferred directly to the PC in the office. A software module for 3D pipe runs, section graphics, any required DIN-compliant documentation is not included.

Sanikom packer basic holder for silicone bladers, with aluminium elements, for T-House Connection Repair.   Available in 4 versions from DN 30 - 87 mm, for recommended silicone T-blader sizes from DN 70 - 200 mm.

Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.