Turn Handle For T-Packer
Product number:
1064466
Product information "Turn Handle For T-Packer"
Turn Handle - Accessory for Sanikom T packers.
Skip product gallery
From
£262.35*
Details
From
£24.95*
Details
From
£19.90*
Details
From
£166.32*
Details
We recommend matching this product:
Sanikom Silicon Bladers Inhouse Repair System
Sanikom Silicon Bladers / T-Blader Inhouse Repair System, used for installing T Felt Liners. Silicone bladders requiring low installation pressure of 0.6 - 0.8 bar only. Several sizes available (DN 70 - 200).
Packer sleeve made of fabric-supported silicone with slight elasticity. The T-Packer is used without release agent as no resin adheres. Suitable for both cold and steam curing.
Side connection: DN 40 to DN 150 (90° or 45°).
Maximum pressure: 1.0 bar
Felt Hats Stretchable With PU Coating 4,5 mm
Sanikom Felt Hats - hat profiles with PU coating 4.5 mm.
Flexible & expandable, in different sizes from DN 100 - 45 to DN 200 - 90.
We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415)- Sani EXR-2 (order number 1064416)
Felt Hats With No Coating 4,5 mm
Sanikom Felt Hats - hat profiles without coating 4.5 mm in various sizes from DN 100 - 45 to DN 250 - 90.
We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415) - Sani EXR-2 (order number 1064416)
Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400
The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.
Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.
Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants.
Applications
Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.