Venting and Measuring Hose 6 m for PU 30 - 60 F, PU 50 - 100 F
The venting and pressure measuring hose is an accessory for PU 30/60 F and PU 50/100 F pipe plugs. With a length of 6 m, it is used for venting and pressure measurement of the pipe plug and is equipped with a GEKA coupling.
Accessories for our pipe stoppers and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Flexible Pipe Sealing Pads PU-F 70 - 1600 mm
The lightweight and flexible sealing pad design of type PU-F without metal core applicable at 2.5 bar operating pressure up to 1,000 mm is suitable for fast and reliable sealing. Can also be used to shut off sewers, pipelines and drainage inlets. These test pipe stoppers are mainly used for repairs, maintenance, accidents and leak tests with water or air according to DIN EN 1610 of newly laid or renovated pipelines. Ideal aid for water management organizations, rescuers and fire departments, but also in the construction industry and industry.The flexible test bladder PU-F is made of high-quality rubber material with fabric insert and is therefore weather- and temperature-resistant in a temperature range from -30 oC to 80 oC as well as use- and waste water-resistant. The product is available in 11 standard versions with diameters ranging from 70 mm to 1600 mm. These test bubbles are tested at 1.3 times the operating pressure and can be used at a back pressure of 10 or 5 m WS. An operating manual is enclosed with each sealing pad. Attention: Please note that we also offer some models of bladders with two passages, but others only with one passage. However, for the version that is only available with one passage due to the manufacturer, adapters with two connections for air or water testing would be available from us on request (please see data sheet on the german page under downloads). Our pipe cushions & shut-off plugs are made of expandable material and can be filled with liquid or air. (Classification in category A - pipe sealing pillows and renovation packers of the resistance list; see picture)
Flexible Pipe Sealing Pads PU-F 70 - 1600 mm
The lightweight and flexible sealing pad design of type PU-F without metal core applicable at 2.5 bar operating pressure up to 1,000 mm is suitable for fast and reliable sealing. Can also be used to shut off sewers, pipelines and drainage inlets. These test pipe stoppers are mainly used for repairs, maintenance, accidents and leak tests with water or air according to DIN EN 1610 of newly laid or renovated pipelines. Ideal aid for water management organizations, rescuers and fire departments, but also in the construction industry and industry.The flexible test bladder PU-F is made of high-quality rubber material with fabric insert and is therefore weather- and temperature-resistant in a temperature range from -30 oC to 80 oC as well as use- and waste water-resistant. The product is available in 11 standard versions with diameters ranging from 70 mm to 1600 mm. These test bubbles are tested at 1.3 times the operating pressure and can be used at a back pressure of 10 or 5 m WS. An operating manual is enclosed with each sealing pad. Attention: Please note that we also offer some models of bladders with two passages, but others only with one passage. However, for the version that is only available with one passage due to the manufacturer, adapters with two connections for air or water testing would be available from us on request (please see data sheet on the german page under downloads). Our pipe cushions & shut-off plugs are made of expandable material and can be filled with liquid or air. (Classification in category A - pipe sealing pillows and renovation packers of the resistance list; see picture)
Grenade Sewer Nozzle, 1/2" - 5/4" for Cleaning and Flushing of Sewer Systems
The Grenade (Granate) is a highly effective sewer nozzle for cleaning and flushing sewer systems. It is used as a mixed nozzle to clean pipes and flush out waste with its concentrated jet action. By arranging the jets at different jet angles, the grenade achieves high cleaning power for routine cleaning work in sewers. The different versions are distinguished by their areas of application: Grenade 50 (1/2") Small, lightweight sewer nozzle for the 100 - 200 mm application range, for cleaning pipes and flushing out waste. Grenade 60 (3/4" or 1") Sewer nozzle for the application range 200 - 300 mm, with 2 different jet angles 10° and 30°, for regular cleaning of sewers and flushing out of waste. Grenade 70 (3/4" or 1") sewer nozzle for the application range 200 - 400 mm, with 3 different jet angles 5°, 15° and 35°. This nozzle has ceramic nozzles with a jet concentrator and a water conduction system. It is ideal for removing sand and stones from the lower part of the pipelines. Grenade 80 (3/4" or 1") sewer nozzle for application range 250 - 500 mm, with 2 different jet angles 10° and 30°, for cleaning and drainage works in sewers for large pipelines. Grenade 100 (3/4" or 1") sewer nozzle for the application range 300 - 600 mm, with 2 different jet angles 7° and 15°, very effective dirt dragging nozzle for dragging sand and stones in the sewer. Grenade 120 (1" or 5/4") sewer nozzle for application range 300 - 800 mm, with 3 different jet angles 7°, 14° and 21°, a nozzle with large internal lung, high power and hydraulic flow, ideal to overcome and clean large distances.
Alien Rotary Nozzle with Frontal Rotary Jet for Clogged and Rooted Pipes 1/2" - 1"
Rotating steel pulling nozzle Alien for clogged pipelines and for cutting small roots. Due to the frontal steel rotation at an angle of 20°, the Alien nozzle breaks up stubborn blockages in pipelines. There is a choice of 4 versions with threaded connection 1/2" - 1", which differ mainly in the range of application and the jet angle, see technical data. The Turbo version has a 30% stronger front jet.
Tiger Standard Pipe Cleaning Nozzle 1/4" or 3/8"
Tiger pipe cleaning nozzle available with rear jet only or with additional front jet. Available in two connection sizes with 1/4" or 3/8" threads. Small, low cost nozzles with 4 or 6 ceramic rear jets for powerful cleaning. Small nozzle with 4-6 ceramic jets to the rear for strong propulsion. Range of application: Due to its compactness, the Tiger nozzle is ideal for small pipes and pipe bends, as it also comes around corners and curves well. The laminar water jet provides constant cleaning and unclogging work in pipes from 75 to 160 mm in diameter. For all features, see technical data.
Vampire Cleaning Nozzle 1/2" - 1" for Large Pipelines, 35°
Cleaning nozzle Vampire for cleaning large pipes from 150 - 400 mm. Threads to choose from: 1/2", 3/4" and 1". Scope of application: removes stubborn blockages and rooting, removes sand and stones from pipes. Features 6 reflectors at a 35° angle. Also available as a front emitter. For characteristics see technical data.
Luchs Large Profile Nozzle 1/2" for Pipe Cleaning in Pipes from 160 - 300 mm
Luchs Pipe cleaning nozzle 1/2" for large profiles - Pipe diameter 160 - 300 mm Thread: 1/2" Pipe diameter: 160 - 300 mm Rear nozzle: 3 x M8 Water flow: from 40 l/min. Dimensions (mm): 64 x 115 Weight: 0,6 kg