Wide Range Lateral Packer Range 30 - 600 mm, Length Up To 5000 mm
Product number:
1070008
Product information "Wide Range Lateral Packer Range 30 - 600 mm, Length Up To 5000 mm"
Very flexible Wide Range Lateral Packer made of rubber, for large dimension jumps. Available in various sizes from 30 - 600 mm and lengths up to 5000 mm.
This rehabilitation packer has the following important advantages over conventional packer models:
- a much smoother surface to which less resin sticks
- the smooth surface also makes the packer more archable, which makes for a nicer rehabilitation appearance
- very flexible material, thus wide range of application
- more dimensional jumps possible than with other packers
- The packer is completely made of rubber and does not have an aluminium band at the ends like standard packers. This prevents "bone formation", which can happen with standard packers and incorrect lamination.
| Item Number | Type / Coat Length | Max. Working Pressure (bar) |
| 1070008 | 30-70 mm / 500 mm | 3 |
| 1070009 | 30-70 mm / 1000 mm | 3 |
| 1070010 | 30-70 mm / 1500 mm | 3 |
| 1070011 | 30-70 mm / 2000 mm | 3 |
| 1070012 | 30-70 mm / 2500 mm | 3 |
| 1070013 | 30-70 mm / 3000 mm | 3 |
| 1070014 | 30-70 mm / 3500 mm | 3 |
| 1070015 | 30-70 mm / 4000 mm | 3 |
| 1070016 | 30-70 mm / 4500 mm | 3 |
| 1070017 | 30-70 mm / 5000 mm | 3 |
| 1070018 | 40-100 mm / 500 mm | 2.5 |
| 1070019 | 40-100 mm / 700 mm | 2.5 |
| 1070020 | 40-100 mm / 1000 mm | 2.5 |
| 1070021 | 40-100 mm / 1500 mm | 2.5 |
| 1070022 | 40-100 mm / 2000 mm | 2.5 |
| 1070023 | 40-100 mm / 2500 mm | 2.5 |
| 1070024 | 40-100 mm / 3000 mm | 2.5 |
| 1070025 | 40-100 mm / 3500 mm | 2.5 |
| 1070026 | 40-100 mm / 4000 mm | 2.5 |
| 1070027 | 40-100 mm / 4500 mm | 2.5 |
| 1070028 | 40-100 mm / 5000 mm | 2.5 |
| 1070029 | 50-150 mm / 500 mm | 2.5 |
| 1070030 | 50-150 mm / 1000 mm | 2.5 |
| 1070031 | 50-150 mm / 1500 mm | 2.5 |
| 1070032 | 50-150 mm / 2000 mm | 2.5 |
| 1070033 | 50-150 mm / 2500 mm | 2.5 |
| 1070034 | 50-150 mm / 3000 mm | 2.5 |
| 1070035 | 50-150 mm / 3500 mm | 2.5 |
| 1070036 | 50-150 mm / 4000 mm | 2.5 |
| 1070037 | 50-150 mm / 4500 mm | 2.5 |
| 1070038 | 50-150 mm / 5000 mm | 2.5 |
| 1070039 | 80-200 mm / 500 mm | 2.5 |
| 1070040 | 80-200 mm / 1000 mm | 2.5 |
| 1070041 | 80-200 mm / 1500 mm | 2.5 |
| 1070042 | 80-200 mm / 2000 mm | 2.5 |
| 1070043 | 80-200 mm / 2500 mm | 2.5 |
| 1070044 | 80-200 mm / 3000 mm | 2.5 |
| 1070045 | 80-200 mm / 3500 mm | 2.5 |
| 1070046 | 80-200 mm / 4000 mm | 2.5 |
| 1070047 | 80-200 mm / 4500 mm | 2.5 |
| 1070048 | 80-200 mm / 5000 mm | 2.5 |
| 1070049 | 200-400 mm / 1000 mm | 2.0 |
| 1070050 | 200-400 mm / 1500 mm | 2.0 |
| 1070051 | 200-400 mm / 2000 mm | 2.0 |
| 1070052 | 200-400 mm / 2500 mm | 2.0 |
| 1070053 | 200-400 mm / 3000 mm | 2.0 |
| 1070054 | 250-600 mm / 1000 mm | 1.5 |
| 1070055 | 250-600 mm / 1500 mm | 1.5 |
| 1070056 | 250-600 mm / 2000 mm | 1.5 |
Skip product gallery
£43.56*
Details
£131.63*
Details
From
£395.01*
Details
From
£945.00*
Details
From
£258.93*
Details
We recommend matching this product:
Push Bar blue with safety clutch for sewer rehabilitation
Air push rod with safety clutch, available in lengths from 1.0 to 3.0 meters. Colour: blue
Professional accessory product for pipe repair / short liner rehabilitation
Safe and simple plug-in coupling: snap in, screw, done!
Thanks to the safety lock, the connection does not come loose even under load.
suitable for use with individual coupling systems: you can easily attach your own coupling systems to these air push rods
GRP Laminate 1081 g/m² Roll Length: 40 m, Width: 34 - 130 cm
GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1081 g/m² in various roll widths and nominal widths - see technical details.
The price applies to a roll of approx. 40 m GRP laminate 1,081 g/m².
Various widths are available. A product overview can be found under "Technical Details".
Long Packer Good And Cheap, Diameter 200 - 800 mm, Lengths up to 5000 mm
Robust long packer for spot repairs on main lines from DN 200 to DN 800. Our long packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. The inflatable packers are resistant to temperatures between -30°C and +70°C, at a working pressure of 1.0 - 2.0 bar (see technical data). Available in diameters of 200 - 800 mm and lengths of 1000 - 5000 mm.
With this long packer you get our own brand at a top price-performance ratio!
The packer can also be equipped with a holder for fiberglass rods to support pushing for an additional charge.
Short Packer With Large Bypass And Wheel Set, affordable, Diameter 150 - 600 mm
Short packers with large bypass allow spot repairs and shut-offs of pipes while the pipe is still in service. Our robust short packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. The inflatable packers are suitable for temperatures between -30°C and +70°C, at a working pressure of 1.5 - 2.0 bar (depending on the model, see technical data).
The short packer has a set of wheels, which makes it easy to move in the pipe. Available in various diameter ranges from 150 - 600 mm.
Areas of application:
Partial repairs of damaged pipes
Repairs with synthetic resins in conjunction with glass fiber composites
Repairs during operation
With this short packer with bypass you get our own brand at a top price-performance ratio!
Medusa Packer, Good And Inexpensive, Application Range 70 - 250 mm, Lengths 600 - 2000 mm
Medusa packers are products that allow spot repairs in areas that are very close to the pipe ends. The robust packers are made by vulcanizing SBR+NR rubber and high-strength fabrics. They are suitable for temperatures between -30°C and +70°C. The added value of this type of packer is that, thanks to its soft rubber back part, it provides access to areas where repairing the pipe is very difficult due to limited space. The Medusa packer is very easy to handle in such situations, and it can also be pushed closer to the edge of the inlet in the main pipe than other packers. With this Medusa packer you get our own brand at a great price-performance ratio! Working pressure depending on the model 2.0 - 2.5 bar (see technical data).
This packer can also be equipped with a holder for fiberglass rods to support pushing for an additional charge.