Additional Strut For Beck Shoring Devices
Additional strut for Beck shoring devices, available with a nominal width of 300 - 600 mm or 600 - 1000 mm. By combining them with a shoring device, pipe closures and pipe testing devices can be secured against being pushed out in a practical manner. With the help of the additional bracing, shoring devices can be supported on the opposite shaft wall (on the top edge of the pipe).
The combination of the bracing device and the Beck trench shoring system provides a positive-fit safeguard against uncontrolled movement or ejection caused by line pressure.
The additional bracing is used for sewer pipes with a diameter of 300 mm or more (up to 1,000 mm) to increase the load capacity, especially during pressure tests. The shoring device with additional struts can absorb counterpressures of up to 5,000 kg for pipes up to NW 1000. The floor support and device length of the additional bracing are variable depending on the pipe diameter and width of the sewer shaft.
| Nominal Size | 300–600 mm | 600–1,000 mm |
|---|---|---|
| Length | 830 mm (extendable up to 1,270 mm) | 830 mm (extendable up to 1,250 mm) |
| Width | 230 mm | 230 mm |
| Height | 420 mm | 420 mm |
| Weight | 13.0 kg | 14.0 kg |
Beck Shoring Device With Additional Struts For Pipe Closures And Pipe Testing Devices NW 100 - 1000 mm
Beck shoring device with additional struts for pipe closures and pipe testing devices - the optimal displacement protection to secure pipe closures and pipe testing devices against being pushed out in a practical manner. According to the accident prevention regulations, these must always be installed, as there is a high back pressure on the pipe closure and testing device during pressure tests. Various versions for nominal widths from 100 to 1,000 mm. Compared to conventional wooden shoring, Beck shoring devices can be used quickly and as often as required, even on smooth or slippery pipe walls. The additional bracing is used for sewer pipes with a diameter of 300 mm or more (up to 1,000 mm) to increase the load capacity. The shoring device with additional struts can absorb counterpressures of up to 5,000 kg for pipes up to DN 1000. Continuous adjustment of the individual devices to the channel diameter. The additional bracing visible in the photos is available separately in two versions and is not included in the scope of delivery.