Skip to main content Skip to search Skip to main navigation
Go to homepage

Calibration Hose Temperature Resistant up to 80°C DN 100 - 400

Product information "Calibration Hose Temperature Resistant up to 80°C DN 100 - 400"

Calibration hose - temperature resistant up to 80°C (Water / Steam), DN 100 - 400 mm, orange. Calibration hoses are used for liner insertion into the pipe system.

Skip product gallery

We recommend matching this product:

Circum Mini Internal Rehabilitation Sleeve With DIBt Approval DN 150 - DN 800

The Circum MINI Internal rehabilitation sleeve with DIBt approval (German Institute for Structural Engineering) is an internal pipe sleeve for small to medium diameters. It is positioned over the damaged spot using an inflatable packer and then pressed against the pipe walls. Expanding the stainless steel sleeve presses the EPDM seal against the inner pipe walls and permanently seals the damaged spot.  The Circum MINI rehabilitation sleeve with its patented, external lock ensures minimal cross-sectional reduction in the pipes and prevents passing impediments from becoming lodged. The rehabilitation sleeve is designed for internal pipe pressures of up to 16 Bar (225psi). Nominal diameter DN 150 - DN 800, width 400 to 450 mm. Free from environmentally harmful lubricants. Fully fitted and ready to mount. Applications: Longitudinal cracks, radial cracks, leaky pipe connections, missing wall sections, closing of unused laterals, replacing missing formwork behind inliners, part formation.    

From €205.70*
Details

ASCOPA Rehabilitation Hose DN 800 - DN 3000

Ascopa rehabilitation hose for large and small diameters. Effective renovation for leaking pipe joints in the socket area. Sealing of socket gaps in accessible sewers and tapered socket gaps from 20 mm to 50 mm socket gap width, with an installation depth of at least 50 mm. The mode of action of the ASCOPA rehabilitation hose is that of an inflatable seal, it can be checked at any time and re-injected if necessary. Available nominal diameters: DN 800 - DN 3000.  Features of ASCOPA rehabilitation hoses The hose can also be installed with a conical socket gap Design of the seal compensates for unevenness Removal and installation uncomplicated and possible at any time The fluid used for filling is environmentally friendly, permanently elastic and cost-effective The renovation hose is available in various profile cross-sections (e.g. egg-shaped profile, mouth-shaped profile or box-shaped profile) EPDM approval according to DIN-EN 681-1 Valve: 1.4404   Good to know: You don't have to worry about the Ascopa rehabilitation hose being damaged during sewer cleaning work, as the EPDM material is sufficiently strong and has a shear strength of 60.

From €222.20*
Details

Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.  Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.  Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.    

From €184.80*
Details