Compressed Air Adapter with Plug Fitting NW 7.2 to Tire Valve
Adapter for tire valve
Accessories for our pipe sealing cushions and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Compressed Air Adapter with Quick Coupling NW 7.2 to Tire Valve
Quick release coupling for tire valveAccessories for our pipe sealing cushions and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Compressed Air Cylinder, 5 L, filled, 20 MPa, 200 bar
The 5-litre compressed air cylinder serves as a mobile compressed air source for inflating suitable pipe sealing cushions and shut-off plugs. It provides an independent compressed air supply when no compressor or stationary compressed air connection is available.The cylinder is supplied filled to a pressure of 200 bar (20 MPa). A suitable pressure regulator and application-specific connection accessories are required for use. Typical applicationsMobile compressed air supply on construction sites and in sewer systemsInflating pipe sealing cushions and shut-off plugsSupporting pipe shut-off, testing and rehabilitation workMobile compressed air supply when no compressor or stationary compressed air connection is availableThanks to its compact design, the compressed air cylinder can be stored in a space-saving manner in a service vehicle and transported to the place of use.Important information: A suitable pressure regulator, available separately, is required for operation. The pressure regulator must be approved for compressed air and for an inlet pressure of at least 200 bar. The required outlet pressure depends on the permissible operating pressure of the connected product. Depending on the connected product, a suitable control unit with a safety valve may also be required.Accessories for our pipe sealing cushions and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Compressed Air Adapter with Hose for Tire Valves, Quick Coupling NW 7.2
Accessories for our pipe stoppers and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Mechanical Pipe Plug and Pipe Test Plug with Bypass DN 16 - 90
Pipe stoppers based on nitrile rubber (water and oil resistant), with bypass. With metal parts made of galvanized steel. Pipe plugs for shutting off and testing pipelines, suitable for backpressure up to 8 bar. Nominal width depending on model from 16 - 90 mm. Range of application depending on model from 15.6 mm - 99 mm. Plug length depending on model 20.0 - 40.0 mm. Advantages of Mechanical Pipe Plugs High pressure resistance – suitable for applications with increased back pressure. In general, pipe plugs and sealing discs must be secured against slipping out when internal pipe pressure exceeds 1 bar. Suitable for long-term use – depending on the application, they can remain safely installed inside the pipe for extended periods. Temperature-resistant versions available – ideal for applications involving higher temperatures or demanding operating conditions. Compact and space-saving design – perfect for tight pipe systems and hard-to-reach areas. Reusable and durable – robust materials ensure a long service life and allow for multiple uses.
Pneumatic Pipe Plug DN 200 - 600, Bypass 1" and 2"
Pneumatic pipe stopper for the closing of pipelines up to 4 bar back pressure. Consists of a robust metal core with a passageway and a high-quality rubber jacket, inflatable via an auto valve. Depending on the model, the nominal width of the pipe closure ranges from DN 200 - 600, with 1" or 2" passage. The maximum inflation pressure is 6 bar. Suitable for temperature ranges from -20 to +80°C.