Compressed Air Cylinder, 5 L, filled, 20 MPa, 200 bar
The 5-litre compressed air cylinder serves as a mobile compressed air source for inflating suitable pipe sealing cushions and shut-off plugs. It provides an independent compressed air supply when no compressor or stationary compressed air connection is available.
The cylinder is supplied filled to a pressure of 200 bar (20 MPa). A suitable pressure regulator and application-specific connection accessories are required for use. Typical applications
- Mobile compressed air supply on construction sites and in sewer systems
- Inflating pipe sealing cushions and shut-off plugs
- Supporting pipe shut-off, testing and rehabilitation work
- Mobile compressed air supply when no compressor or stationary compressed air connection is available
Thanks to its compact design, the compressed air cylinder can be stored in a space-saving manner in a service vehicle and transported to the place of use.
Important information: A suitable pressure regulator, available separately, is required for operation. The pressure regulator must be approved for compressed air and for an inlet pressure of at least 200 bar. The required outlet pressure depends on the permissible operating pressure of the connected product. Depending on the connected product, a suitable control unit with a safety valve may also be required.
Accessories for our pipe sealing cushions and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Filling pressure: 200 bar (20 MPa)
Test pressure: 300 bar
Dimensions (L × W × H): 140 × 140 × 570 mm
Weight: approx. 10 kg
Condition on delivery: filled
Grenade Sewer Nozzle, 1/2" - 5/4" for Cleaning and Flushing of Sewer Systems
The Grenade (Granate) is a highly effective sewer nozzle for cleaning and flushing sewer systems. It is used as a mixed nozzle to clean pipes and flush out waste with its concentrated jet action. By arranging the jets at different jet angles, the grenade achieves high cleaning power for routine cleaning work in sewers. The different versions are distinguished by their areas of application: Grenade 50 (1/2") Small, lightweight sewer nozzle for the 100 - 200 mm application range, for cleaning pipes and flushing out waste. Grenade 60 (3/4" or 1") Sewer nozzle for the application range 200 - 300 mm, with 2 different jet angles 10° and 30°, for regular cleaning of sewers and flushing out of waste. Grenade 70 (3/4" or 1") sewer nozzle for the application range 200 - 400 mm, with 3 different jet angles 5°, 15° and 35°. This nozzle has ceramic nozzles with a jet concentrator and a water conduction system. It is ideal for removing sand and stones from the lower part of the pipelines. Grenade 80 (3/4" or 1") sewer nozzle for application range 250 - 500 mm, with 2 different jet angles 10° and 30°, for cleaning and drainage works in sewers for large pipelines. Grenade 100 (3/4" or 1") sewer nozzle for the application range 300 - 600 mm, with 2 different jet angles 7° and 15°, very effective dirt dragging nozzle for dragging sand and stones in the sewer. Grenade 120 (1" or 5/4") sewer nozzle for application range 300 - 800 mm, with 3 different jet angles 7°, 14° and 21°, a nozzle with large internal lung, high power and hydraulic flow, ideal to overcome and clean large distances.
Alien Rotary Nozzle with Frontal Rotary Jet for Clogged and Rooted Pipes 1/2" - 1"
Rotating steel pulling nozzle Alien for clogged pipelines and for cutting small roots. Due to the frontal steel rotation at an angle of 20°, the Alien nozzle breaks up stubborn blockages in pipelines. There is a choice of 4 versions with threaded connection 1/2" - 1", which differ mainly in the range of application and the jet angle, see technical data. The Turbo version has a 30% stronger front jet.
Tiger Standard Pipe Cleaning Nozzle 1/4" or 3/8"
Tiger pipe cleaning nozzle available with rear jet only or with additional front jet. Available in two connection sizes with 1/4" or 3/8" threads. Small, low cost nozzles with 4 or 6 ceramic rear jets for powerful cleaning. Small nozzle with 4-6 ceramic jets to the rear for strong propulsion. Range of application: Due to its compactness, the Tiger nozzle is ideal for small pipes and pipe bends, as it also comes around corners and curves well. The laminar water jet provides constant cleaning and unclogging work in pipes from 75 to 160 mm in diameter. For all features, see technical data.
Vampire Cleaning Nozzle 1/2" - 1" for Large Pipelines, 35°
Cleaning nozzle Vampire for cleaning large pipes from 150 - 400 mm. Threads to choose from: 1/2", 3/4" and 1". Scope of application: removes stubborn blockages and rooting, removes sand and stones from pipes. Features 6 reflectors at a 35° angle. Also available as a front emitter. For characteristics see technical data.
Luchs Large Profile Nozzle 1/2" for Pipe Cleaning in Pipes from 160 - 300 mm
Luchs Pipe cleaning nozzle 1/2" for large profiles - Pipe diameter 160 - 300 mm Thread: 1/2" Pipe diameter: 160 - 300 mm Rear nozzle: 3 x M8 Water flow: from 40 l/min. Dimensions (mm): 64 x 115 Weight: 0,6 kg