Compressors & Waste Water Pumps
We offer portable piston compressors and powerful waste water pumps especially for municipal and commercial companies from the environmental technology and waste water industry. All products focus on an insensitive and durable design for demanding outdoor use.
Small mobile compressors on wheels are part of the standard range, which can be easily moved from A to B and are available in different configurations that are ready to go. You do not know which model is right for your needs? We are pleased to help you make your choice!
In addition, we recommend the ultra-strong full-flow pump, which reaches its limits neither with mud and coarse solids nor with rags and paper towels. This makes conveying contaminated media quick and easy - ideal for flooding, pipe breaks and other sewer work.
REKO 560/90 VM Mobile Piston Compressor 4.0 kW With Gasoline Motor, 10 Bar, 90 Liter
Gasoline-driven piston compressor for use independent of electricity, e.g. on construction sites or in service vehicles. Renner's mobile piston compressor is easy to move and load due to its compact design. With safety quick coupling, pressure reducer and lashing eye, ideal for industry and trade. Performance Data REKO 560W/90 VM: Suction volume: 539 l/min Capacity (acc. to VDMA 4362): 400 l/min Maximum pressure: 10 bar Cylinder/Stages 2/1 Speed motor: 1300 U/min Sound Level Lwa dB*: 98 dB(A) Compressed air tank: 90 Liter Dimensions L x B x H: 730 x 540 x 1000 mm Weight: 88 kg * acc to. DIN EN ISO 2151:2009 You can find further features under the "Technical data" tab and in the product data sheet under "Downloads".
Fini Compressor soundproofed YAGO 1850 oil-free 11 kW
This compressor is soundproofed and oil-free. This entry-level model is lightweight and fully enclosed. Due to its lightweight construction, this piston compressor is easy to transport. The electric motor has overload protection. The included kit consists of: Blow gun, spiral hose and filling accessories. Let this little expert convince you!
REKO 350W/22 Mobile Piston Compressor For Hobby And Craft 2.2 kW
Highly efficient piston compressor from Renner with direct engine start and pressure reducer. Equipped with wheels, easy to transport and therefore ideal for mobile use. The robust Renner REKO compressors of the 350W series are designed for small to medium compressed air requirements and are delivered ready for connection and operation for 230 volts AC. Performance data REKO 350W/22: Suction volume: 350 l/min Capacity (acc. to VDMA 4362): 250 l/min Nominal motor power: 2.2 kW Voltage: 230 V Maximum pressure: 10 bar Cylinder/Stages 2/1 Speed motor: 1450 U/min Sound level*: 72 dB(A) Compressed air tank: 2x11 Liters Dimensions L x B x H: 800 x 650 x 780 mm Weight: 68 kg * acc to. DIN EN ISO 2151:2009 You can find further features under the "Technical data" tab and in the product data sheet under "Downloads".
Fini Compressor Ciao 6/1850 Oil Free 1,1 kW
This portable and mobile piston compressor for special applications is basically suitable for applications in which oil-free compressed air is required, for example when spraying paints and varnishes. All fragile parts are mounted in such a way that they are protected by the supporting frame construction. The direct Drive motor is equipped with overload protection. It is controlled by an electromechanical pressure switch. As standard, this directly Driven compressor is equipped with a pressure switch, manometer and quick disconnect clutch. The rubber feet mounted below the frame protect the floor. This piston compressor operates at a maximum pressure of 8 bar and has oil-free compression.
Compressed Air Cylinder, 5 L, filled, 20 MPa, 200 bar
The 5-litre compressed air cylinder serves as a mobile compressed air source for inflating suitable pipe sealing cushions and shut-off plugs. It provides an independent compressed air supply when no compressor or stationary compressed air connection is available.The cylinder is supplied filled to a pressure of 200 bar (20 MPa). A suitable pressure regulator and application-specific connection accessories are required for use. Typical applicationsMobile compressed air supply on construction sites and in sewer systemsInflating pipe sealing cushions and shut-off plugsSupporting pipe shut-off, testing and rehabilitation workMobile compressed air supply when no compressor or stationary compressed air connection is availableThanks to its compact design, the compressed air cylinder can be stored in a space-saving manner in a service vehicle and transported to the place of use.Important information: A suitable pressure regulator, available separately, is required for operation. The pressure regulator must be approved for compressed air and for an inlet pressure of at least 200 bar. The required outlet pressure depends on the permissible operating pressure of the connected product. Depending on the connected product, a suitable control unit with a safety valve may also be required.Accessories for our pipe sealing cushions and shut-off plugs. Our sealing cushions and accessories are certified according to ISO 9001.
Hand air pump with pressure gauge, suitable for schrader valves
High quality hand air pump with hose, pressure gauge and schrader valve connection stable metal cylinder good readable manometer up to 11 bar ergonomic T-handle movable hose for comfortable inflation fits Schrader, Presto and Dunlop valves adapter case included length of hose: 0,75 m This is an accessory product for small pipe sealing cushions with Schrader valve as well as for our flexible PVC sealing bags. You can find these fast shutoff products in the category called Pipe closure with schrader valve. This hand pump is also available as a version with a coupling plug directly on the pump hose and without a connection for the schrader valve (all other features of the pump are the same as described above). This enables faster filling of small pipe plugs without a schrader valve up to approx. DN 300. This version of the hand air pump, which costs just as much as the other version with connection to a schrader valve, no longer has a connection for the schrader valve. However, you can fill smaller pipe plugs up to DN 300 more quickly, as there is no air resistance between the air pump and the adapter for the schrader valve by filling the plug directly via the coupling plug. The coupling plug restricts the air flow to a lesser extent. You can request a quote for this product or order it directly by giving reference to our article number: 1022201. Do you have any questions? We will be happy to consult you!
Fini Compressor Warrior 362M 2,2 kW
The piston compressor captivates by its small, but robust construction. The Warrior 362M piston compressor from Fini is ideal for smaller renovations or other special applications. The Warrior 362M is specially designed for 16 amp fuse protection. The high-quality 2-Cylinder V-unit with low speed and direct Drive reduces vibration and noise level. The electric motor has overload protection. This mobile piston compressor also features practical details such as a transport handle, which can also be used as a hose holder, and a tool tray above the unit. The pneumatic tyres make this compressor easy to transport.
Fini Compressor Warrior 592/592M Build Air 3 kW
The Warrior Build Air series piston compressors are ideal for special applications such as minor renovations. The direct Drive and low speed reduce vibration and make this compressor low-maintenance. The Warrior 529 and 592M Build Air models offer the same benefits as the Warrior 362M model. The small, robust design is underlined by practical details such as a transport handle that can also be used as a hose holder. Above the unit there is a tool tray which also protects the high-quality 2-Cylinder V-unit. The piston compressors of the Warrior BuildAir series are available for 230 V and 400 V electrical connection.
Fini Compressor AIRPROFI BK119 High Pressure 4,4 kW
The 2-stage AIRPROFI BK119 compressors are equipped with a 2-Cylinder high-performance unit. The high-performance unit made of grey cast iron guarantees a low speed and thus a long service life. In addition, this model series is equipped with an intercooler to the aftercooler. The advantages of this series lie in its comprehensive equipment: Aftercooler with large lamellas for a low tank inlet temperature and less humidity in the compressed air Large fan wheel and cooling guide plate for optimum cooling of the compressor Electric motor with motor protection switch and high tightening torque Easy starting due to starting capacitor, starting relief valve and toothed starting Belt Durable Belt guard made of metal Third compressed air tapping point via direct outlet at the boiler with ball valve One-hand safety quick coupling: Improvement of user safety, as the coupling is pressureless. CONDOR pressure switch for fully automatic on/off operation Compressed air tank galvanised inside and outside, 15 year manufacturer's warranty on the tank against rusting through 400 volt models as standard with phase reverser for easy reversal of rotation direction Completely Ready For Connection This professional piston compressor is available in different versions. Choose your version according to the maximum pressure of 13 or 15 bar.
Fini silenced Compressor SILENT PULSAR Direct Driven 1,8 od. 2,2 kW
The low-noise, portable compressor with direct flanged 2-Cylinder V-posed compressor pump is equipped with the Silent Soundproof housing and newly developed noise-reducing air filters. This Belt-Driven compressor is therefore ideal for the user who needs a quiet working environment. It features a compact design and a special cooling air system for optimum temperatures and low noise emission. The special features of this compressor series are in detail: Reduced condensate accumulation due to intercooler and aftercooler Electric motor equipped with motor protection switch Filter pressure regulator with manometer Two pressure gauges for tank pressure and working pressure quick-release coupling Ready For Connection with all fittings Fully automatic on/off operation Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve Excellent accessibility for maintenance work Corrosion-free valve plates The 1.8 kW Silent Pulsar model is also equipped with a pressure reducer with 2 pressure gauges and a protected control panel. The shockproof, removable soundproof hood and a thermally controlled fan for a good temperature level are an additional plus of this model. Select your model according to engine power.
REKO 350W/24 Mobile Piston Compressor For Hobby And Craft 2.2 kW
Highly efficient piston compressor from Renner with direct drive and pressure reducer. Equipped with wheels, easy to transport and therefore ideal for mobile use. The robust Renner REKO compressors of the 350W series are designed for small to medium compressed air requirements and are delivered ready for connection and operation for 230 volts AC. Performance data REKO 350W/24: Suction volume: 350 l/min Capacity (acc. to VDMA 4362): 250 l/min Nominal motor power: 2.2 kW Voltage: 230 V Maximum pressure: 10 bar Cylinder/Stages 2/1 Speed motor: 1450 U/min Sound level*: 72 dB(A) Compressed air tank: 24 Liter Dimensions L x B x H: 800 x 650 x 780 mm Weight: 68 kg * acc to. DIN EN ISO 2151:2009 You can find further features under the "Technical data" tab and in the product data sheet under "Downloads".
Fini Kompressor Pioneer/l 265M 1,5 kW
The piston compressor is handy and its compact design makes it ideal for assembly, handicraft and DIY applications. The newly designed design of the Pioneer/l 265M model includes a useful control panel and an integrated pressure switch and pressure reducer. The electric motor with overload protection delivers 1.5 kW. The portable compressor can be used up to a pressure of 10 bar. All fragile parts are structurally mounted so that they are protected by the support frame construction. The new design offers double shock protection and easy handling. Two suction pads at the front and two tyres at the rear support the stability. The Pioneer/l 265M is the ideal piston compressor for special applications requiring mobility.
Fini Compressor shuttle OL230 Oil Free 1,5 kW
This oil-free, mobile piston compressor is ideal for special applications. This handy assembly compressor can be used in the workshop or on the construction site, as well as in technical field service. The rubberized carrying handle facilitates transport. All fragile parts are structurally mounted so that they are protected by the supporting frame construction. The 2 HP engine is equipped with overload protection. The rubber feet underneath the frame protect the floor. This piston compressor operates at a maximum pressure of 8 bar and has oil-free compression.
Double Diaphragm Pump Fullflow 502 For Sewage Engineering 530 l/min
Debem Fullflow 502 pneumatic double diaphragm pump with clapet circuit and maximum flow rate of 530 l/min. Suitable for the transfer of highly viscous fluids, which may also contain suspended solids up to 45 mm diameter. The pump can therefore be used ideally for sewage engineering and water treatment industry. Debem's robust and extremely low-maintenance diaphragm pumps are designed to high standards and are suitable for continuous use. Features Fullflow 502 Double diaphragm pump: Max flow rate*: 530 l/min* Suction/delivery connections: G 2 1/2" f BSPP Air fitting: 1/2" f BSPP Max head*: 40 m Max supply air pressure: 4 bar Max negative suction head - dry running**: 3.5 m Max diameter suspended solids: 45 mm Max. particle length: 600 mm Weight: 38 kg *The curves and performances refer to pumps with immersed suction and free delivery port, with water at 20°C and vary according to the materials of composition. Advantages PATENTED stall-prevention pneumatic circuit Polypropylene body the pump continues to run without blocking in case of pressure imbalances. Clapet in EPDM and NBR and natural rubber, core in AISI 316 always in contact with fluid Operated with NOT lubricated air Self-priming no additional manual priming device required Dry running capability the pump can run dry without being damaged Possibility to adjust the operating speed Suitable for handling liquids with high viscosity and for heavy duty applications Capable of pumping liquids with suspended solids (up to 45 mm diameter) Low maintenance and durable diaphragm Dual suction and discharge Applications Water treatment industry Ceramic, Stone, Marble, Glass and Mininig industry Galvanic and electronic industry/li> Textile and leather industry/li> Packing, glue, paper ans paper mills In your inquiry, please specify the type of liquid to be pumped and the product code according to the following coding table. Any questions? Our customer service team will be happy to help!
Fini Compressor Big Pioneer 2,2 kW
The Big Pioneer piston compressor series is particularly light and handy. These compressors are ideal for use on construction sites. The newly designed design includes an ergonomic and clear control panel. This control panel consists of one manometer each to display the boiler pressure and the set working pressure, two compressed air extraction points and a complete internal maintenance block. The electric motor with overload protection delivers 2.2 kW or 3 PS. The mobile compressor can be used up to a pressure of 10 bar. All fragile parts are designed in such a way that they are protected by the support frame construction. The new design offers double shock protection and easy handling. Two suction pads at the front and two tyres at the rear support the stability. The Big Pioneer is available in different performance levels for intake and filling.