Flex Adapter S For T-Packer
Product number:
1064467
Product information "Flex Adapter S For T-Packer"
Flex Adapter S - Accessory for Sanikom T packers.
Skip product gallery
From
€33.66*
Details
From
€184.80*
Details
€47.52*
Details
From
€459.80*
Details
From
€222.20*
Details
We recommend matching this product:
T-Felt-Liner With PU Coating 3,3 mm
Sanikom T-profile liner / T-Felt Liner 3.3 mm with PU coating for house connection repair. Available in different sizes, see Technical details. Dimensions of the T-profile liner: 50 cm / 25 cm (see illustration).
T- Felt Liner Impregnation- Mixing the resin and impregnating the T-liner- The resin must be mixed in the correct ratio- The resin must be mixed for 3 minutes- Pour the resin onto the liner and massage it deep into the structure of the T-Liner. Check the complete impregnation by looking into the T-liner- Impregnation (impregnation) without white spots
Fill the packer with T-Liner- Push silicone packer side connector into packer and place packer under vacuum place- Pull T-Liner over packer (positioning over inverted side port)- Invert the packer side port out with light pressure- Reduce packer pressure to invert the side port including the T-liner into the packer (without folding).- Put the packer under vacuum- Fix the T-Liner with crepe tape
Please note: The side connector should be pushed into the packer against the direction of installation.
We recommend the use of the following epoxy resin systems:
- Sani EXRR-2 (order number 1064415)- Sani EXR-2 (order number 1064416)
Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400
The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.
Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.
Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants.
Applications
Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.
Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection
Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection - Accessory for Sanikom T packers.
Inflatable Rubber Plugs for T-Packers
Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.
ASCOPA Rehabilitation Hose DN 800 - DN 3000
Ascopa rehabilitation hose for large and small diameters. Effective renovation for leaking pipe joints in the socket area. Sealing of socket gaps in accessible sewers and tapered socket gaps from 20 mm to 50 mm socket gap width, with an installation depth of at least 50 mm. The mode of action of the ASCOPA rehabilitation hose is that of an inflatable seal, it can be checked at any time and re-injected if necessary. Available nominal diameters: DN 800 - DN 3000.
Features of ASCOPA rehabilitation hoses
The hose can also be installed with a conical socket gap
Design of the seal compensates for unevenness
Removal and installation uncomplicated and possible at any time
The fluid used for filling is environmentally friendly, permanently elastic and cost-effective
The renovation hose is available in various profile cross-sections (e.g. egg-shaped profile, mouth-shaped profile or box-shaped profile)
EPDM approval according to DIN-EN 681-1
Valve: 1.4404
Good to know: You don't have to worry about the Ascopa rehabilitation hose being damaged during sewer cleaning work, as the EPDM material is sufficiently strong and has a shear strength of 60.