Flex Adapter with Safety Coupling
Flex adapter in various designs for renovation packers, shut-off and test bags. Flex adapters make the bends more flexible, which enables leak tests even in widely branched drainage systems.
For example, a socket test in DN 100, 125, 150 or DN 200 can now be carried out without any problems using a small starting opening with DN 100 with a subsequent 87 ° bend.
Push Bar blue with Hexagonal Coupling for sewer rehabilitation
Air push rod, blue, with hexagonal coupling for precise positioning of rehabilitation packers, available in lengths from 1.5 to 3.0 m. indispensable tool for pipe renovation on T-pieces particularly suitable for use with a T-packer for the rehabilitation of sockets and branches Due to the firmly seated hexagonal coupling, the packer can be turned with the help of the air push rod and thus achieves the perfect fit in the side connection of the sewage pipe We would be happy to advise you on the search for suitable accessories for your sewage project.
HD Lateral Packer DN 25-1000 mm
Multidimensional Lateral Packer for Straight PipesThis multidimensional, lateral rehabilitation packer has been specially developed for professional pipe rehabilitation and offers outstanding flexibility and durability. Thanks to its unique design, it is ideally suited for straight pipes as well as bends of up to 45°. With a wide range of applications from DN 25 to DN 1000 and lengths of up to 5000 mm, this packer offers maximum versatility in daily use. The innovative material construction allows for exceptionally large expansion, meaning that multiple pipe dimensions can be covered with just one packer. For example, an HD packer in size DN 125–300 covers up to five different pipe diameters – a clear advantage in terms of efficiency and cost-effectiveness. Maximum Adaptability and Ease of Use The small initial diameter allows for use even in confined spaces. At the same time, the combination of high flexibility and dimensional stability ensures optimal adaptation to different pipe diameters and guarantees a reliable, complete seal.The excellent sliding behaviour enables precise positioning – even in hard-to-reach areas. For additional flexibility, the packer can be fitted with an optional flex adapter for air-powered push rods. Efficient Pipe Rehabilitation Using the Short-Liner-MethodThe packer is fitted with a short liner, guided to the rehabilitation site within the pipe using air-powered push rods, and inflated using compressed air. After a curing period, the packer is deflated and removed. After each use, the packer should be carefully cleaned and inspected for damage.Your benefits at a glance Covers a wide range of sizes with just a few packers Suitable for DN 25 to DN 1000 Can navigate bends up to 45° Extremely robust and durable design High flexibility combined with a stable shape Simple and precise positioning Ideal for confined spaces For all pipe materials (KG, SML, Stoneware) Can be upgraded for steam curing Cost-effective and efficient in use Just three HD packers are sufficient to fully cover nominal diameters from DN 30 to DN 1000. Note: For pipe bends from 45° to 180°, we recommend the appropriate HD bendy packer from the same series.Please refer to the downloads provided for technical details.
ECR GRP laminate 1387 g/m², width 34 - 130 cm DN 100 - 250, price per 40 m roll
GRP laminate consisting of glass complex multipatch ECR Advantex fabric layer and tangled layer. GRP laminate 1387 g/m² in various roll widths and nominal widths - see technical details. Price for a roll with approx. 40 m of laminate. The total weight can be found on the technical data sheet. The weight of the rolls may vary slightly (+/- 0.5 kg) due to the manufacturer.
Circum Mini Internal Rehabilitation Sleeve With DIBt Approval DN 150 - DN 800
The Circum MINI Internal rehabilitation sleeve with DIBt approval (German Institute for Structural Engineering) is an internal pipe sleeve for small to medium diameters. It is positioned over the damaged spot using an inflatable packer and then pressed against the pipe walls. Expanding the stainless steel sleeve presses the EPDM seal against the inner pipe walls and permanently seals the damaged spot. The Circum MINI rehabilitation sleeve with its patented, external lock ensures minimal cross-sectional reduction in the pipes and prevents passing impediments from becoming lodged. The rehabilitation sleeve is designed for internal pipe pressures of up to 16 Bar (225psi). Nominal diameter DN 150 - DN 800, width 400 to 450 mm. Free from environmentally harmful lubricants. Fully fitted and ready to mount. Applications: Longitudinal cracks, radial cracks, leaky pipe connections, missing wall sections, closing of unused laterals, replacing missing formwork behind inliners, part formation.
Displacement Packer With Wheel Set For Circum Systems DN 150 - DN 800
Displacement packer with wheel set for professional and simple setting of internal rehabilitation sleeves, specially developed for the Circum systems and suitable for sleeves DN 150 - DN 800. Due to the uniform expansion over the entire length, made possible by the special design of the packers, the sleeves are already completely pressed on with the first application of pressure at a low contact pressure. The packers are flexible and can be guided around curves. It is not necessary to move the packer under the locks. Wheel sets do not have to be removed for small nominal diameters. The wheel set is adjustable, thus suitable for multiple areas. The displacement packers are very robust against wear and organic solvents due to aramite fabric, which is covered by high quality EPDM. Features Displacement Packer No need to move the packer under the locks Adjustable wheel set Low contact pressure Capable of cornering High resistance to wear and organic solvents
HD Arch Packer DN 40 - 600 mm
HD arch packer for sewer rehabilitation in pipe bends. Multidimensional rehabilitation packer from 45° to 180° degrees in designs from DN 40 - 600. This innovative curve packer is suitable for all pipe materials. It has an ideal sliding behaviour and does not buckle.
Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400
The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes. Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm. Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.