Flexible Pipe Rehabilitation Packers with Wheel Set and Bypass DN 100 -1200
Sanikom Flexible Packer with wheel set and bypass. Suitable for sectional repair of damaged pipelines. The packers are used in combination with synthetic resins and reinforcing materials such as CRF+ glass fibre, which ensure increased tightness.
The end result is an excellent mechanical, chemical and temperature resistant joint over a length of up to 5 metres. Available nominal diameters from 100 - 1200 mm with lengths from 1 - 5 metres, see Technical Details.
| Usage range (mm) |
Available lengths (m) |
Operating pressure (bar) |
Bypass (inch) |
|---|---|---|---|
| 100 - 150 | 1 / 2 / 2.5 / 3 / 4 / 5 | 2.5 | - |
| 150 - 250 | 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 | 2.0 | 3" |
| 200 - 300 | 1 / 2 / 2.5 / 3 / 4 / 5 | 1.5 | 3" |
| 300 - 400 | 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 | 1.5 | 3" |
| 450 - 600 | 1 / 1.5 / 2 / 2.5 / 3 | 1.2 | 3" |
| 600 - 800 | 1.5 / 2 / 2.5 / 3 | 1.0 | 4" |
| 800 - 1000 | 1.5 | 1.0 | 4" |
| 1000 - 1200 | 2 | 1.0 | 4" |
Replacement Cover for Flexible Packers
Replacement Cover for Sanikom Flexible Packers. For packer application ranges from 150 - 1200 mm, lengths 1 - 5 metres, see Technical Details.
Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400
The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes. Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm. Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.
Pipe Inspection Camera 14 mm, with 30 m Fiber Optic Cable and 7" Monitor with DVR Function
This camera system for pipe inspection impresses with its slim design with a 14 mm camera, a watertight, robust design with immunity to interference while maintaining top quality thanks to state-of-the-art camera heads and LED illumination.The complete system consisting of camera, sliding rod on reel and monitor offers the necessary equipment to inspect pipes in the range from Ø25 mm to Ø200 mm. Thanks to the 6 LED lights with adjustable luminosity, you always have the ideal illumination for any pipe diameter.The controls on the pipe inspection camera and on the remote control are provided with self-explanatory icons which allows a quick familiarization.The onscreen meter counter means you always know exactly how far into the pipe you have gone, and recorded images and videos are immediately stored on the SD card and can be transferred directly to the PC in the office. A software module for 3D pipe runs, posture graphics, possibly required DIN compliant documentation is not included.
Circum Mini Internal Rehabilitation Sleeve With DIBt Approval DN 150 - DN 800
The Circum MINI Internal rehabilitation sleeve with DIBt approval (German Institute for Structural Engineering) is an internal pipe sleeve for small to medium diameters. It is positioned over the damaged spot using an inflatable packer and then pressed against the pipe walls. Expanding the stainless steel sleeve presses the EPDM seal against the inner pipe walls and permanently seals the damaged spot. The Circum MINI rehabilitation sleeve with its patented, external lock ensures minimal cross-sectional reduction in the pipes and prevents passing impediments from becoming lodged. The rehabilitation sleeve is designed for internal pipe pressures of up to 16 Bar (225psi). Nominal diameter DN 150 - DN 800, width 400 to 450 mm. Free from environmentally harmful lubricants. Fully fitted and ready to mount. Applications: Longitudinal cracks, radial cracks, leaky pipe connections, missing wall sections, closing of unused laterals, replacing missing formwork behind inliners, part formation.