Skip to main content Skip to search Skip to main navigation
Go to homepage

Inversion Fitting 6" With Storz Coupling 50 - 250 mm

Product information "Inversion Fitting 6" With Storz Coupling 50 - 250 mm"
Inversion Fitting 6" With Storz Coupling 50 - 250 mm
Skip product gallery

We recommend matching this product:

Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes.  Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm.  Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.    

From €184.80*
Details

Inversion Drum Sanidrum 600 With 6" Storz

Sanidrum 600 Inversion Drum with 6" Storz - low weight (39 kg) inversion drum made of composite material.   New design - What is new?  - Completely new wheel system with extremely durable rubber wheels (diameter 30 cm) - New leg system with rubberised legs connected to a square connection for better stability - New aluminium frame - Higher inversion drum, 15 cm higher than in the old version - Equipped with a safety valve of 1,1 bar.   High temperature resistance, no corrosion and easy maintenance. Can even be used with steam as heating media. The new Sanidrum inversion drum series has an improved stability and durability and can even resist more pressure to install inversion liners. Liner capacity up to 40 m (DN 100).

€7,326.00*
Details

ASCOPA Rehabilitation Hose DN 800 - DN 3000

Ascopa rehabilitation hose for large and small diameters. Effective renovation for leaking pipe joints in the socket area. Sealing of socket gaps in accessible sewers and tapered socket gaps from 20 mm to 50 mm socket gap width, with an installation depth of at least 50 mm. The mode of action of the ASCOPA rehabilitation hose is that of an inflatable seal, it can be checked at any time and re-injected if necessary. Available nominal diameters: DN 800 - DN 3000.  Features of ASCOPA rehabilitation hoses The hose can also be installed with a conical socket gap Design of the seal compensates for unevenness Removal and installation uncomplicated and possible at any time The fluid used for filling is environmentally friendly, permanently elastic and cost-effective The renovation hose is available in various profile cross-sections (e.g. egg-shaped profile, mouth-shaped profile or box-shaped profile) EPDM approval according to DIN-EN 681-1 Valve: 1.4404   Good to know: You don't have to worry about the Ascopa rehabilitation hose being damaged during sewer cleaning work, as the EPDM material is sufficiently strong and has a shear strength of 60.

From €222.20*
Details