Nozzle Renovation / Inlet Renovation
- Are you looking for accessories for nozzle renovation? Then you've come to the right place, because we have the full range: T-liners and T-packers, epoxy resin, adapters for push rods and much more.
- You need a certain product and can't find it online? Ask us, we will be happy to get it for you! Since our products come from German or European production, you also benefit from our short delivery times.
- Are you new to the business and need advice from professionals? We will be happy to assist you with your renovation project.
- You can also get to know our high-quality range of products for nozzle renovation at trade fairs in Germany.
Felt Hats With No Coating 4,5 mm
Sanikom Felt Hats - hat profiles without coating 4.5 mm in various sizes from DN 100 - 45 to DN 250 - 90. We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415) - Sani EXR-2 (order number 1064416)
T-Felt-Liner With PU Coating 3,3 mm
Sanikom T-profile liner / T-Felt Liner 3.3 mm with PU coating for house connection repair. Available in different sizes, see Technical details. Dimensions of the T-profile liner: 50 cm / 25 cm (see illustration). T- Felt Liner Impregnation- Mixing the resin and impregnating the T-liner- The resin must be mixed in the correct ratio- The resin must be mixed for 3 minutes- Pour the resin onto the liner and massage it deep into the structure of the T-Liner. Check the complete impregnation by looking into the T-liner- Impregnation (impregnation) without white spots Fill the packer with T-Liner- Push silicone packer side connector into packer and place packer under vacuum place- Pull T-Liner over packer (positioning over inverted side port)- Invert the packer side port out with light pressure- Reduce packer pressure to invert the side port including the T-liner into the packer (without folding).- Put the packer under vacuum- Fix the T-Liner with crepe tape Please note: The side connector should be pushed into the packer against the direction of installation. We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415)- Sani EXR-2 (order number 1064416)
Blue Epoxy Systems For In-House and Lateral Systems
Sanikom epoxy resin bundle for in-house and mainline rehabilitation, hardens very quickly. Epoxy resin system for the house and house connection area, consisting of epoxy resin and hardener. In combination with pipe liners or a felt hat it creates a robust material for sewer pipes. Blue colored product for easier control during processing and for visibility in the pipe. Very pleasant to process due to its slightly thicker consistency. Due to its special flow properties, it also adheres excellently to the fabric. Very fast curing times compared to other products in the same price category! Price per bundle. There are 5 different epoxy systems to choose from (for properties, see Technical Data): EXRR-2 (Bundle 14 kg + 4,2 kg) and EXR-2 (Bundle 14 kg + 3,92 kg) - medium viscosity - cure very quickly at room temperature - suitable for cold regions such as Scandinavia as they react down to 5 degrees Celsius - high mechanical and Résistance chimique as well as temperature resistance even when cured in the room - hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the lateral or internal connection. EX1-2 and EX2-2 (Bundle each 14 kg + 3,5 kg) - Medium viscosity - Fast curing - Suitable for short to medium installation lengths - High mechanical and Résistance chimique as well as temperature resistance even with room curing - Hardeners from both systems can also be used in combination with SANIKOM thick epoxy resin so that they do not run into the side or in-house connection. EX4-2 (Bundle 14 kg + 2,8 kg) - Excellent reactive system with low viscosity and a good ratio between processing and curing time - suitable for short to medium installation lengths - high mechanical and Résistance chimique as well as temperature resistance when the epoxy system is cured at a temperature of 50-80 degrees Celsius. WARNING Processing epoxy resins poses health risks. Please wear your PPE and be sure to follow the instructions in the respective safety data sheet! If you have any questions about sewer renovation with epoxy resin, please contact our customer service.
Content: 18.2 Kilogramm (€18.00 / 1 Kilogramm)
Sanikom Holders For Silicon Bladers DN 70 - DN 200
Sanikom packer basic holder for silicone bladers, with aluminium elements, for T-House Connection Repair. Available in 4 versions from DN 30 - 87 mm, for recommended silicone T-blader sizes from DN 70 - 200 mm.
Sanikom Silicon Bladers Inhouse Repair System
Sanikom Silicon Bladers / T-Blader Inhouse Repair System, used for installing T Felt Liners. Silicone bladders requiring low installation pressure of 0.6 - 0.8 bar only. Several sizes available (DN 70 - 200). Packer sleeve made of fabric-supported silicone with slight elasticity. The T-Packer is used without release agent as no resin adheres. Suitable for both cold and steam curing. Side connection: DN 40 to DN 150 (90° or 45°). Maximum pressure: 1.0 bar
Turn Handle For T-Packer
Turn Handle - Accessory for Sanikom T packers.
Flex Adapter S For T-Packer
Flex Adapter S - Accessory for Sanikom T packers.
Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection
Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection - Accessory for Sanikom T packers.
Control Unit for T-Packer
Control Unit for Sanikom T packers (vacuum - pressure)
Felt Hats Stretchable With PU Coating 4,5 mm
Sanikom Felt Hats - hat profiles with PU coating 4.5 mm. Flexible & expandable, in different sizes from DN 100 - 45 to DN 200 - 90. We recommend the use of the following epoxy resin systems: - Sani EXRR-2 (order number 1064415)- Sani EXR-2 (order number 1064416)
T Packers Main Packer for T-Connection Repair
Sanikom T-Packer - Main packer for T-Connection Repair in combination with inflatable rubber plugs. Operating pressure between 1.5 and 2.5 bar depending on the version. Available in 8 different application ranges from 100 - 700 mm diameter, see technical data.
Inflatable Rubber Plugs for T-Packers
Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.