Sanikom Silicon Bladers Inhouse Repair System

Sanikom-Silikonmantel-fuer-Hausanschluss-Stutzen-Sanierung-2

€291.50*

Prices excl. VAT plus shipping costs.
Duty-free for delivery to Switzerland and the UK.

Type

Product number: 1064438

Product information "Sanikom Silicon Bladers Inhouse Repair System"

Sanikom Silicon Bladers / T-Blader Inhouse Repair System, used for installing T Felt Liners. Silicone bladders requiring low installation pressure of 0.6 - 0.8 bar only. Several sizes available (DN 70 - 200).

Packer sleeve made of fabric-supported silicone with slight elasticity. The T-Packer is used without release agent as no resin adheres. Suitable for both cold and steam curing.

Side connection: DN 40 to DN 150 (90° or 45°).

Maximum pressure: 1.0 bar

Procedures Manual T-Packer System

Technologies and materials for repairing pipes

Shortliner System

We recommend matching this product:

Turn Handle For T-Packer

Turn Handle - Accessory for Sanikom T packers.

€145.20*

Details

Inflatable Rubber Plugs for T-Packers

Inflatable rubber plugs for T-packers from Sanikom. Available in 5 application ranges from 100 - 250 mm diameter. Operating pressure between 1.2 and 1.4 bar, depending on the version.

From €459.80*

Details

Sanikom Holders For Silicon Bladers DN 70 - DN 200

Sanikom packer basic holder for silicone bladers, with aluminium elements, for T-House Connection Repair. Available in 4 versions from DN 30 - 87 mm, for recommended silicone T-blader sizes from DN 70 - 200 mm.

From €488.40*

Details

Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection

Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection - Accessory for Sanikom T packers.

€47.52*

Details

Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400

The Circum LEM liner end sleeve with DIBt approval (German Institute for Structural Engineering) was developed, to protect the vulnerable liner ends. It uses mechanical compression and seals the liner ends in pipes. Enlarging the stainless steel sleeve presses the EPDM seal against the inliner and also permanently seals it to the host pipe. The EPDM seal's special geometry ensures the bridging and sealing of any gaps within the lined pipe end. The patented external lock prevents the deflection roller from damaging or even removing the liner end sleeve when pipes are being cleaned. Nominal diameter DN 150 - DN 400, width 250 mm. Fully fitted and ready to mount. The Circum LEM liner end sleeve is free from environmentally harmful lubricants. Applications Connecting and sealing liner ends on pipes and structures, protecting vulnerable liner ends.

From €184.80*

Details

Sanikom Silicon Bladers Inhouse Repair System

Turn Handle For T-Packer

Inflatable Rubber Plugs for T-Packers

Sanikom Holders For Silicon Bladers DN 70 - DN 200

Adapter air connection from Hexagon push rod T-Packer system to normal quick air-connection

Circum LEM Liner End Sleeve With DIBt Approval DN 150 - DN 400

Technical Consulting

Customised products

Pay upon invoice

Duty free